Using 25 × 25mm ² 32 grid design, Glass plate thickness 1.2~ 2mm, through the standard Checkerboard test can accurately calculate the Coating hiding power, easy and fast operation.
Measurement range 0~ 100, repeability accuracy 0.3%, Permissible Ambient Temperature 20 ° +/- 5 ° C, suitable for film hiding power testing.
With 45/0 reflectance and hiding power test function, repeability 0.2%, repRoducibility 0.5%, automatic calibration and correction of black and white board values, support USB data transmission and statistical mode.
Used for paint film hiding power measurement and reflectance measurement, indication interval 0-100, Repeatability 0.3%, in line with national standards GB/T13452.3, GB9270, GB5211.
Adopt 0 ° illumination diffuse reflection reception principle, Repeatability ≤ 0.3, Indication Error +/- 1.0, suitable for white and shallow Paints hiding power measurement, easy and portable operation.
Hard stainless steel material acid and alkali erosion, can be prepared 100/150/200/250μm four thickness wet-film, the operation of the conversion angle can switch the thickness, application width 80mm.
Glass material can be used for repeatability, Checkerboard size 25x25mm, shape 250x100mm, in line with the national standard GB/T1726, durable and accurate test.
Pure white paper surface sealed, size 194x286mm, ASTM standard, support hiding power measurement and levelling sag test, matching Applicator Rod can obtain uniform coating results.
Using film lamination technology, with excellent solvent and chemical resistance, paper Film thickness 0.29mm, surface Laminating to ensure Spreader uniformity, with annotation section for easy recording of test data.
Using film lamination technology, with excellent chemical resistance and uniform Spreader effect, paper Film thickness 0.29mm and surface Laminating, with a dedicated annotation area for easy recording of test data.
Using non-fluorescent paper substrate, white reflectance 80 +/- 2, black reflectance < 1, Laminating design enhances Curl resistance, 0.1 square Meter standard area is suitable for spreading rate testing.
Adopt 0 ° illumination diffuse reflection reception principle, indication interval 0-100, Repeatability 0.3%, support contrast ratio automatic calculation, equipped with standard plate and working ceramic plate to ensure Measurement accuracy.
White part reflectance 80 +/- 2, black part reflectance less than 1, surface smoothing anti-Curl, suitable for 0.1 square Meter spreading rate test, wettability is good for checking.
Black and white half design, size 98x152mm, ASTM standard, can accurately measure Coating hiding power, support transparent film and plastic pRoducts hiding ratio detection.
Made of stainless steel wear-resistant material, the application width is not less than 100mm, providing a variety of film thickness options from 25μm to 2000μm, suitable for hiding power measurement and sample preparation.
