Can be used with A type or C type Shore DuroMeter, fixed load weight mass 0.75 +/- 0.05kg, hardness Gauge clamping Rod connection size M7x0.5mm, improve hardness testing accuracy and Stability.
1000 +/- 5g dead weight and 500 +/- 5g payload combined pressure, equipped with 20 times reading Microscope to achieve 0.1mm accuracy measurement, can quantify the anti-indentation performance of coatings and support plastic deformation analysis.
High Accuracy Position Sensor, indentation accuracy of 0.01mm, the maximum can be measured 1.25mm thick plate, automatic zero after the test without cumulative error, with 10 times magnifying glass for easy observation.
Test accuracy is ensured by using 500g payload and carbide circular tool, built-in horizontal bubble, and 20 times Microscope can accurately measure the size of the Crowd, with a reading accuracy of 0.1mm.
Che type hardness Gauge, test range 0~ 100HBa, equivalent to brinell hardness 25~ 150HB, no support, one-handed operation, with MAX Maximum retention function, suitable for various aluminum alloys and frp materials.
The device adopts D-type Impact device, supports 360 ° measurement, can display a variety of Hardness standards, has 600 sets of Data storage capacity, is small in size and weighs only 0.2kg, and has a standby time of 100 hours. It is suitable for small spaces and field environments.
Supporting D-type Shore DuroMeter, applying 5kg test force by weight, equipped with Glass bench and adjusting nut to ensure full contact with the sample and improve measurement Stability.
Suitable for materials such as high Hardness rubber and engineering plastics, pressing needle Travel 0~ 2.5mm, Measurement range 0~ 100HD, error +/- 1HD, in line with ASTM D 2240-05 and GB/T2411-2008 standards.
The C-type Impact device has a small impact force and is suitable for surface hardening and thin-walled component testing; dual coil technology ensures +/- 6HL typical accuracy; built-in directional Sensor automatically compensates for errors; supports 5 Hardness standard conversions.
Suitable for medium Hardness rubber, thermal plasticity resilience and other materials, Measurement range 0-100HB, can be hand-held or matched with a fixed load test bench to ensure stable measurement.
Suitable for soft rubber, thermal plasticity resilience and extremely soft plastics, Hardness Measurement range < 20 HDO, with real-time, peak, timing and average Measurement mode, can be connected to the computer for data management and analysis.
With three Adjustments, it can simultaneously measure Richter, Brinell, Rockwell and other Hardness values, indication Repeatability 6HLD, support 360 ° measurement direction, standard D-type Impact device and optional Miscellaneous type, anti-vibration Impact electromagnetic interference.
Pressure is applied to the hardness Gauge by weight, with a total mass of about 5kg and a pressing speed of 3.2mm/s to ensure test Stability and High Precision, suitable for standard specimen adjustment.
Compact and lightweight can be operated with one hand, without support and testing experience, the test range is equivalent to brinell hardness 25~ 150HB, can measure a variety of Hardness scales and has MAX Maximum hold and average calculation functions.
Suitable for medium Hardness rubber, thermal plasticity resilience and other materials, Measurement range 0-100HDO, Indication Error ≤ +/- 1HDO, can be hand-held or matched with fixed load test bench, flexible operation.
