The use of PTFE oxygen permeable membrane to ensure oxygen permeability, spiral cap design for easy installation and electrolysis filling, suitable for Portable dissolved oxygen measurement equipment maintenance.
PTFE oxygen permeable membrane ensures oxygen permeability, ABS plastic material enhances durability, screw cap design simplifies installation process, suitable for long-term water quality monitoring applications.
Using triple ceramic dialysis membrane and LT Glass Sensor membrane, Measurement range 0.00~ 12pH, support -5~ 70 ℃ sample temperature measurement, built-in temperature sensor to achieve automatic compensation, Bluetooth connection for data transmission.
Using PTFE oxygen permeable membrane, the probe cathode and anode are isolated from the sample, and oxygen passes through the membrane and acts with the polarographic system to generate current to ensure accurate and reliable measurement.
Simultaneous sampling ECT (100 * 25) mm and PAT (80 * 25) mm two sizes, sampling error +/- 0.5mm, thickness range ≤ 10mm, easy to operate.
Using high density polyethylene (PE) oxygen permeable membrane to achieve efficient oxygen diffusion, equipped with ABS plastic screw cap structure for easy installation and electrolysis filling, and interact with the current system for accurate measurement of dissolved oxygen concentration.
Using film heating and PID intelligent temperature control technology, the temperature control accuracy is up to +/- 0.3 ° C, the temperature uniformity is less than or equal to +/- 0.5 ° C, and the automatic preheating and power failure recovery functions are supported.
Sampling size 25.4mm * 140mm, thickness range 0.05~ 1.2mm, parallelism of two long sides ≤ 0.015mm, to ensure High Accuracy sampling, Improve Test Reliability.
Measurement range 0-10mm, accuracy ≤ 0.02mm, Graduation 0.01mm, pressure 22kPa +/- 2kPa, upper probe diaMeter < 10mm plane, simple and reliable structure, handheld and Benchtop two specifications.
The sampling area is 100mm ² and the error is controlled within +/- 0.35cm ², which can handle 0.1~ 1.2mm Film thickness materials. The circular sampling design is used to ensure the standard of the sample, and the operation is simple and the results are reliable.
High sampling accuracy, parallelism ≤ 0.015mm, thickness range of 0.1~ 1.2mm, suitable for a variety of paper strength tests to ensure accurate and reliable detection data.
Sampling area 100cm ², error +/- 0.35cm ², stamping sampling method, suitable for 0.1~ 1.0mm thickness materials, to ensure accurate sample standards.
Fillable internal reference solution design with circular Glass sensitive membrane and annular ceramic liquid junction for low Conductivity Detector samples ensures measurement Stability and accuracy.
The bearing with accurate guidance and reasonable fulcrum structure, good sampling Repeatability, can handle materials with a thickness of 0.1-1 mm, support 70 * 38mm fold stiffness and 38 * 36mm crease stiffness two sizes, long side parallelism ≤ 0.015mm.
The linear guide is used to ensure smooth and fast sampling, and the imported tungsten sheet is cut without burrs and durable. It supports 18mm thickness sampling, and can cut 25 × 100mm and 25 × 80mm samples.
