Color Difference Standard Light Box

A color difference standard light box simulates standard light source environments such as daylight and fluorescent light to provide stable lighting conditions. It is used to eliminate ambient light interference, enabling visual or instrumental comparison of color differences under uniform conditions. It is applied in industries such as textiles, printing, and coatings for product color quality control.
Selection
When selecting, consider the coverage of light source types, including common standards such as D65 and TL84. Illuminance uniformity should exceed 90%, and the cabinet size must accommodate the samples to be tested. The inner walls should be neutral gray to avoid reflection interference, and the cabinet should have a metamerism detection function. Regular calibration is required to account for light source decay, and the cabinet's sealing affects observation stability.

Terms

Standards

Instruments

With a standard 45 degree tilt angle, the same as the light box base color does not interfere with the viewing effect, Dimension 395 * 350mm, weight 1.2Kg, flexible placement and easy to disassemble and transport.

$ 106.00

Using 45 °/0 ° illumination, Repeatability Standard Deviation ≤ E * ab ≤ 0.08, can store 1500 sets of data, support a variety of Color difference formulas and four Available Light Sources to meet different measurement needs.

$ 501.00

Special design container to ensure measurement conformity, suitable for color scheme, suitable for fine powder particle measurement, effectively avoid the influence of powder tightness and surface Smoothness.

$ 220.00

Adopt Φ 4mm measurement aperture and full Light spectrum LED Illuminant, chromatic value Repeatability Delta E * ab 0.05, support cloud color database and a variety of Color difference formula calculation, portable design with dust cover and long battery life.

$ 538.00

Equipment provides a variety of standard illuminant options, maximum support three Illuminant, high CRI = 98, with Illuminant Timer, uniform lighting, easy to operate, suitable for Color Comparison.

$ 848.00

Adopt 45/0 illumination light receiving system, 8mm measurement aperture, support single and average Measurement mode, Repeatability Standard Deviation ≤ E * within 0.1, can carry out color difference contrast analysis and color quality control.

$ 307.00

Standard light source without preheating, can automatically switch and record the use of time, the use of composite engineering plastic baseplate to ensure ten years without yellowing, support Metamerism detection function.

$ 396.00

Double light source in line with ISO3664 international standards, color rendering index up to 98, with light source Timer, all-metal structure, large folio size easy to operate, accurate proofreading Color deviation.

$ 1784.00

In line with ISO3664 international standards, color rendering index of 98, support multi-light source switching, all-metal structure to ensure stability and durability, inclined table in line with visual observation habits.

$ 1913.00

With Φ 4mm and Φ 8mm dual measurement caliber, Repeatability Delta E * ab < 0.06, can store 100 sets of master standards, Measurement time only 0.5 seconds, support sub-color difference display and Color bias analysis function.

$ 1009.00

Adopt 8mm measurement diaMeter, Repeatability Delta E * ab < 0.05, equipped with TFT true color display, support a variety of Measurement light sources and Color difference formula, suitable for a variety of material surface color detection.

$ 1042.00

Provide adjustable illuminance and Color temperature visible light, Color temperature range 2300K-8000K, illuminance up to 3000LX, infrared wavelength 850nm optional, radiation intensity greater than 400uW/CM ², stable light color without stroboscopic, life over 10,000 hours.

$ 5850.00

Using D/8 lighting mode and full Light spectrum LED Illuminant, Inter-instrument Agreement Delta E * 00 < 0.2, equipped with non-contact automatic whiteboard calibration and multi-function smart buttons, easy to carry and wireless connection, to achieve accurate Color measurement and Color Chart recognition.

$ 231.00

Color temperature adjustment range 2300K-8000K, illumination adjustment range 0-4000Lux, built-in mobile slide can move the camera front and rear, light source light board can swirl/spin to adjust the angle, provide a uniform lighting environment.

$ 5366.00

Configuration of 6 Standard light sources including D65 and UV Illuminant, equipped with 45 degree observation station to achieve 45/0 observation conditions, no need to warm up without flashing, high luminous efficiency Color evaluation fast and reliable.

$ 1171.00

Articles