Can cut 25 * 100mm sample, sampling error +/- 0.5mm, sampling thickness range of 18mm, fast and accurate completion of Corrugated Board Edge Crush Test and adhesive strength test sample preparation.
Precision combination of cutting edge to ensure that the sample edge flat, especially for ring pressure test design, can cut standard samples, easy to operate, cutting effect is good.
Adopting imported sliding track and blade, it can cut samples with accurate parallelism, Measurement range 10~ 1000mN, cutting size 100 × 60mm, scale laser engraving clear and wear-resistant.
The imported sliding track is used with the blade to cut multi-layer Cardboard samples, the sampling size error is +/- 0.5mm, the sampling thickness range is 18mm, the scale laser engraving is clear and wear-resistant, and the strong magnet is convenient for blade installation.
It can cut 32.2cm ² and 64.5cm ² samples, the sampling error is less than 0.5cm ², and the maximum sampling thickness is 15mm, which meets the accurate sampling requirements of Corrugated Board Flat Crush Test.
High sampling accuracy, support 152 × 12.7mm ring pressing and (200~ 250) × 15mm stretching, folding resistance, blade combination precision to ensure that the sample edge is flat, easy to operate.
Thrust sampling mode, cutting edge pressure sample 25mmx100mm and gluing sample 25mmx80mm, sampling thickness range of 18mm, suitable for Corrugated Board and carton mass detection.
Simultaneous sampling ECT (100 * 25) mm and PAT (80 * 25) mm two sizes, sampling error +/- 0.5mm, thickness range ≤ 10mm, easy to operate.
Using three-point positioning method and High Accuracy coaxial concentric process, the parallelism of the two long sides is less than or equal to 0.015mm, the sampling thickness is 0.1-1.2mm, the built-in spring resilience coefficient decays more slowly, and the chrome steel tool has high durability after high temperature quenching.
Sampling thickness range of 18mm, width accuracy of +/- 0.5mm, can simultaneously cut edge pressing and gluing two sample specifications, simple structure and easy maintenance.
Stamping type sampling structure, sampling length accuracy +/- 0.2mm, width accuracy +/- 0.1mm, suitable for 0.1~ 1.0mm thickness materials, sampling both sides of the parallelism is less than 0.015mm.
Using 0.01N High resolution Force Value Sensor, equipped with 12.5mm/min constant speed pressurization system, support ring pressure, side pressure, flat pressure, adhesive strength and other test modes, to meet a number of national standards.
The precision blade combination ensures that the edge of the sample is flat, and can cut 152 × 12.7mm annular pressure samples and (200~ 250) × 15mm tensile samples, with a volume of 670 × 450 × 470mm and a weight of 35kg.
The precision blade combination ensures that the edge of the specimen is flat, and 152 * 12.7mm annular compression specimens and (200~ 250) * 15mm tensile specimens can be cut, meeting TAPPI-T409 and JIS-P8113 standards.
6 tests, including Ring Crush Test and Edge Crush Test, can be performed, with a clamping thickness range of 0.1 to 1.0mm, and is equipped with a master disk and thirteen sub-disks to meet a variety of testing requirements.
