With a conical mandrel design, the resilience of the coating can be evaluated in a single test in the diaMeter range of 3.1 to 38mm, and the thickness of the test plate is less than or equal to 0.8mm.
Glass conical film design, equipped with stainless steel protective cover, suitable for soil and other special sample measurement, pH Measurement range 0-14, Operating temperature 5-60 ℃, PTFE single salt bridge structure.
Using conical mandrel design, can measure the cracking resistance and elongation of the coating, the thickness of the test plate supports 0.8mm, easy to operate without power supply, to meet a variety of standard test requirements.
Measurement range 0~ 14pH, Operating temperature 0~ 80 ℃. High strength conical sensitive membrane can pierce semi-solid sample.
The conical mandrel bending range is 3.1 to 38mm, and the plate thickness can be tested by 0.8mm. The panel is instantly locked and unlocked with a fast lever handle, which is convenient for operation.
Using pure mechanical design, the coating performance is measured by conical mandrel bending test plate, the test plate size is 100mm × 180mm, the thickness is less than or equal to 0.8mm, and the operation is simple and reliable.
The thickness of the pressurable steel plate Aluminum Panel is 0.2~ 1.5mm, the weight of the whole machine is 50kg, and the compact shape is only 300 * 300 * 190mm, which meets the NCCA standard T-Bend test method.
The tapered shaft size range is 3.2~ 38mm, and the shaft length is 203mm, which can test the cracking and disbonding performance of the paint film under bending conditions, in line with international standards.
With +/- 0.1% accuracy Sensor and 0.01mN resolution, it supports 1-92 ° bending angle adjustment and 0.5-50 °/sec angular speed control, with self-Adjustment and three independently adjustable test angles, suitable for 0.01-5 thickness materials.
The equipment can perform a 45 ° bending test, support 0.5~ 1.0mm plate thickness, equipped with Travel ≥ 10mm flattening mechanism, suitable for accurate testing of coating flexibility.
Measurement width 200mm, thickness within 1.5mm test plate, stainless steel cone diaMeter range 3.2-38 mm, anodic oxidation aluminum material, complete 180 ° bending test within 15 seconds.
Support 0.1-1 steel plate and 0.1-2 Aluminum Panel test, can complete 0T to 1T multi-stage bending, equipped with pliers pressing device and tape adhesion inspection function, to meet the standard bending test process.
Suitable for solid-state semi-solid piercing measurement, using high-performance ceramic core liquid junction and long-life reference structure, Measurement range 0-14pH, Temperature range 0-60 ℃.
Conical mandrel size is 3.1~ 38 mm, length 203 mm, stainless steel material, wear resistance and corrosion resistance, can test the bending performance of steel, aluminum alloy and plastic sample, easy to operate.
The cone shaft is used to test the anti-cracking performance of coatings with different curvatures. The size of the cone shaft is Φ 3.1~ 38mm, the volume is small and the weight is light, which is convenient for laboratory and field use.
