Wire-wound structure, wet film thickness 4μm, diaMeter 12.7mm, total length 585mm, wire diaMeter 0.05mm, stainless steel material to ensure durability and precise coating control.
The wire-wound design ensures uniform coating application, with a wet film thickness of 109.7 microMeters and a coating width of up to 300 milliMeters, making it suitable for surface treatment on a variety of substrates.
Equipped with dual coating methods of wire rod and blade, with an infinitely adjustable coating speed of 1–300 mm/s, wire rod accuracy of ±0.001 mm, blade accuracy of ±0.003 mm, and optional heating and vacuum adsorption functions to meet coating requirements of various thicknesses.
Using extrusion process and 304 stainless steel material, the minimum wet film thickness can be controlled by 1.5 μm, and the groove design provides greater Coating Weight to avoid wire loosening and clogging problems.
The wet film thickness can be controlled by 1.5μm, the bottom of the groove is wider and the Coating Weight is large, and the extrusion process and chrome plating surface are adopted, which is not easy to loosen the broken wire, easy to clean and not blocked.
The wet film thickness can be as low as 1.5μm to achieve ultra-thin Spreader; the bottom of the groove is wider, and the Coating Weight is larger; the extrusion process is adopted to avoid the problem of loose wire and broken wire, and it is easy to clean.
It can control the wet film thickness as low as 1.5μm. It adopts extrusion process and 304 stainless steel material. The bottom of the groove is wider and the Coating Weight is larger, and it is not easy to loosen and break the wire, and it is easy to clean.
Using wire-wound process, wet film thickness 12 μ m, application width 220mm, through precision winding stainless steel wire to form a uniform groove, to achieve precise and controllable Coating thickness.
The precision drawing stainless steel wire winding process is used to form uniform grooves to control the Coating thickness, the wet film thickness reaches 120μm, and the application width is 220mm to ensure the accuracy and repeatability of the coating.
Made by wire-wound process, wet film thickness 50μm, application width 420mm, uniform groove is formed by precision stainless steel wire winding to achieve accurate control of Coating thickness.
Coating thickness is controlled by wire-wound structure, wet film thickness reaches 100μm, application width 420mm, uniform groove is formed by precision stainless steel wire winding to achieve repeability Spreader effect.
Using extrusion process and 304 stainless steel material, the wet film thickness can be controlled by 1.5μm, and the bottom of the groove is wider to increase the Coating Weight, so as to avoid the problem of steel wire loosening and blockage.
Using wire-wound process, wet film thickness 60μm, application width 220mm, through precision stainless steel wire winding to form a uniform groove, precise control of Coating thickness.
With bar and drawdown blade two coating methods, Spreader thickness range 0~ 10mm, coating speed 5~ 200mm/s, support stepless speed and automatic feeding customization function.
Using wire-wound process, wet film thickness 60μm, application width 420mm, through precision stainless steel wire winding to form a uniform groove, can control the Coating thickness and ensure Repeatability.
