The rotational speed range is 200-11000rpm, the processing capacity is up to 40L, and the precision-matched stator structure is used to achieve high-efficiency shear emulsification, which is suitable for the dispersion of various viscosity liquids and granular materials.
Using 316 stainless steel working head, Speed range 1000-13000rpm, maximum processing viscosity 8000mpa.s, with stepless speed regulation and real-time data display function, suitable for shear emulsification experiments of various viscosity liquids.
Driven by a series-excited high-speed motor, Speed range 0-11000rpm, rotor maximum linear speed of 19m/s, tens of thousands of shear tears per minute, processing viscosity up to 8000cp, to achieve efficient emulsification dispersion.
Range 320~ 320000000mPa · s, support 0.1~ 200rpm stepless speed change, LCD screen can simultaneously display viscosity, shear rate, shear stress and other sets of paraMeters, with a small number of sample adapters only 10-20mL sample volume.
Small hydraulic device to achieve masonry shear test, rated thrust 150KN, digital pressure Gauge direct reading, accuracy +/- 1%, detection of local damage, easy to operate.
Using 16-bit microcomputer processor and stepper motor high subdivision drive, the whole process of stepless variable speed and stable Rotation speed, Measurement accuracy of +/- 1% F. S, LCD screen can display viscosity, shear rate, shear stress, Rotation speed, temperature and torque and other paraMeters.
Rotation speed of 3000rpm, Processing capacity 25m ³/h, using three groups of stator structure, to achieve strong impact and shear, self-priming ability, continuous operation, suitable for a variety of materials mixing.
The speed range is 200-11000rpm, the processing capacity is up to 40L, and the stainless steel shearing emulsification head is used to achieve efficient shearing, tearing and mixing, suitable for medium and high viscosity liquids.
Rotation speed up to 26000rpm, providing 27m2/s shear line speed, long-term stable operation, fine and uniform processing of materials, no dispersion dead angle, suitable for high viscosity up to 10000CP working conditions.
The device can quickly mix ground dispersed materials in a closed system, with a speed range of 1500-3500 rpm, a mixing capacity of 5-150G, and features bubble-free and quiet operation.
The non-contact mixing method is adopted to avoid sample contamination, the speed range is adjustable from 0 to 2800rpm, and various containers such as testtube beakers are supported. The mixing efficiency is dozens of times higher than that of manual mixing, and the mixing is uniform.
Adopt closed system design, mixing capacity 5-200G, Speed range 1500-3500rpm, can achieve fast and efficient Mix & disperse, the operation process is quiet, pollution-free and bubble-free, support manual and intelligent two control modes.
Using 316 stainless steel working head, Speed range 1000-14000rpm, maximum processing viscosity 8000mpa.s, with constant speed control and overload protection, suitable for mixing and emulsification of various viscous liquids, real-time display of experimental data.
Made of stainless steel, the diaMeter of the slurry is 60mm, and the diaMeter of the Rod is 8mm. It is suitable for efficient mixing of medium and low viscosity liquids. The structure is simple and durable, and the mixing effect is uniform and stable.
Mixing method of low speed intermittent sticking barrel edge, professional Impeller design, can be thoroughly stirred in 10 minutes without heating up, Speed range 0~ 50rpm adjustable, easy to replace stainless steel Mixing Tank.
