Using one-piece casting process, strong and not easy to deform, maintaining test parallelism; Measurement range 0~ 4mm, resolution 0.01mm, contact pressure 100 +/- 10kPa, contact area 2 +/- 0.05cm ², in line with standard requirements.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
The formed pRoduction process ensures uniform film, wet film thickness of 110μm, total length 250mm with 250mm application width, 304 stainless steel material provides durability and accurate Spreader effect.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Measurement accuracy of 0.01mm, measurement pressure of 20 +/- 0.5kpa, can maintain good parallelism, suitable for film thickness test below 20mm.
Aluminum die-casting ceramic coating working plate is resistant to abrasion and corrosion, the highest temperature is 350 ° C, the temperature control accuracy is +/- 0.2 ° C, the DC brushless motor runs smoothly with low noise, and the double heating control circuit ensures temperature stability.
The extrusion process ensures accurate 16 micron wet film thickness, the stainless steel is durable and provides 300 mm application width for efficient sample preparation.
The formed process ensures that the film is uniform, the film thickness is 118.9μm, the Rod diaMeter is 9.5mm, the total length is 40cm, and the effective application width is 30cm.
Spreader uniform, wet film thickness 27.4 micron precise control, durable stainless steel material and application width 300mm, suitable for multi-sample prepative.
Using a formed pRoduction process, the wet film thickness accuracy can reach 0.5 microns, supports ultra-thin film Spreader, provides a variety of thickness options from 0 to 150 microns, and the application width is 60mm.
The formed pRoduction process ensures uniform film, provides 47 micron accurate wet film thickness, 304 stainless steel material is durable and easy to clean, suitable for a variety of Coating sample prepative.
Wet film thickness 45μm, main Rod diaMeter 10mm, effective application width 600mm, using SUS304 material, Coating Weight, length and surface preparation can be customized, suitable for a variety of Spreader conditions.
Precision cold extrusion process is used to make continuous groove structure, wet film thickness 40μm, application width 60mm, stainless steel material to ensure long-term use Stability and accurate Spreader effect.
Using molding process to ensure unbroken wire, film thickness 32.0 μ m, effective application width 300mm, suitable for a variety of Adhesive sample Spreader.
Using formed pRoduction process, wet film thickness 4 microns, application width 250mm, can be equipped with a handle to achieve uniform force, improve Spreader effect.
