The extrusion molding process is used to ensure continuous wire, the film thickness is precisely controlled by 20μm, the application width is 250mm to meet various needs, and the 304 stainless steel material is durable and easy to clean.
Adopt integrated injection molding measurement frame and transparent water Tank, anti-corrosion and drop resistance; density readability 0.001g/cm ³, Capacity 300g; support a variety of liquid media, rapid testing suitable for field applications.
Suitable for high voltage molding sand test, compression stroke 2.50mm, load 1500g, with average calculation and MAX Maximum latch function, support USB and Bluetooth data communication.
Using high frequency principle, Measurement range 0-99.9%, resolution 0.1/0, Response Time 1 second, probe type Sensor can penetrate deep into the material internal measurement, backlight LCD display clear and low consumption.
Rotation speed control is accurate and synchronization performance is good; the height of the casting roller can be adjusted to adapt to different solution strength materials; the surface finish of the hard chrome-plated mirror roller is high, and it is equipped with a circulating water chilling down system. Temperature control accuracy +/- 1 ℃.
Using the principle of Archimedes buoyancy method, density accuracy of 0.001g/cm ³, weighing range of 0.005~ 300g, integrated molding large water Tank design, can measure larger block objects, with temperature compensation and RS-232C interface.
Can be prepative 9.1 micron wet-film, application width 300mm, using formed pRoduction process, suitable for ultra-thin Spreader process, high accuracy.
The formed integrated molding process ensures accuracy, wet film thickness 12 μ m, application width 300mm, 304 stainless steel material, durable and easy to clean.
Using molding process to ensure unbroken wire, film thickness 32.0 μ m, effective application width 300mm, suitable for a variety of Adhesive sample Spreader.
The formed integrated molding process ensures that the structure is firm, the 30 micron wet film thickness precisely controls the Spreader effect, and the stainless steel material is durable and easy to clean and maintain.
Made by molding process, wet film thickness 137.2μm, application width 300mm, stainless steel material to ensure durability, easy to clean and not easy to break wire.
Using extrusion molding process, film thickness 105 microns, application width 250mm, diaMeter 10mm, 304 stainless steel material to ensure durability and accurate Spreader effect.
Adopt fan speed control to improve Temperature uniformity, air duct circulation system automatically discharges water vapor, Temperature range RT + 10~ 250 ℃, Temperature Fluctuation +/- 1 ℃, with over-temperature protection and timing function.
Using dip coating process with double roll extrusion residual material, Spreader thickness adjustable, mechanical speed 0.1-1 m/min, Oven temperature 50-150 ℃ +/- 3 ℃, suitable for a variety of Coating Spreader.
The extrusion molding process is used to ensure accuracy, providing 47 μm wet film thickness and 300mm application width, and the 50mm handheld design on both sides of the handle is convenient for manual operation. 304 stainless steel is durable and easy to clean.
