Sampling thickness range 0.1~ 1.2mm, folding stiffness 70x38mm, crease stiffness 36x38mm, parallelism on both sides ≤ 0.015mm, suitable for stiffness testing.
It can cut 70 × 38 and 38 × 36 samples, and the sampling thickness range is less than or equal to 1mm. It is suitable for special sampling equipment for stiffness and crease detection, and is used with a variety of stiffness Meters.
Measurement range 1-30N, accuracy +/- 1%, using High Accuracy Force Sensor and precision screw drive system, Repeatability of test results, equipped with calibrated probe pad for easy Measurement calibrated, can be connected to computer display Linear dispersion.
Measurement range 0~ 20N, resolution 0.01N, with movable bench lifting function and thermal print output, support anti-pressure-deformation Linear dispersion real-time display.
Double measurement head structure design, Measurement range 0~ 10N, resolution 0.01N, automatic test to avoid human error, built-in tray automatic lifting to improve efficiency.
It can measure the anti-bending stiffness of the material with a thickness of 0-3mm, the test angle is adjustable from 1-90 °, supports 6 kinds of bending lengths and 3-30 seconds time settings, adopts digital motor control and displays the stiffness time in real time Linear dispersion.
The large diaMeter design is used to facilitate sample pouring in and out, the inner wall arc transition is easy to clean, and the accuracy is controlled within 0.2% to ensure reliable measurement results.
Using aluminum alloy material, the accuracy is controlled within 0.2%, the inner wall arc transition is easy to clean, and the lid small hole design can overflow excess samples to avoid bubbles and improve the test accuracy.
Using 70 * 38mm standard sampling size, the thickness range covers 0.1-1 mm, the parallelism of the two long sides is controlled within 0.015mm, and the crease stiffness sampling size is 38 * 36mm, which improves the accuracy of the stiffness test data.
Double measurement head structure design, Measurement range 0~ 20N, Indication Error +/- 1%, automatic electronic test, one key operation to avoid human error, built-in tray automatic lifting function.
Using aluminum alloy material, the accuracy is controlled within 0.2%, the inner wall arc transition is easy to clean, and the lid hole design can overflow excess samples to avoid bubbles and improve the test accuracy.
The punching sampling method ensures accuracy, the sampling size error is controlled within 0.1mm, and two specifications of 70 * 38mm stiffness and 36 * 38mm crease stiffness are supported.
The large diaMeter design is used to facilitate sample pouring in and out, the accuracy is controlled within 0.2%, the inner wall arc transition ensures easy cleaning, and the lid with small holes can overflow excess samples to avoid bubbles and improve the test accuracy.
Adopt replaceable filter design, support 1-8mm aperture selection; Cup annular groove can store overflowing liquid, Cup wall has no clean dead angle; comply with DIN53211 standard, with unique serial number for easy tracking.
The bearing with accurate guidance and reasonable fulcrum structure, good sampling Repeatability, can handle materials with a thickness of 0.1-1 mm, support 70 * 38mm fold stiffness and 38 * 36mm crease stiffness two sizes, long side parallelism ≤ 0.015mm.
