The formed process ensures that the film is uniform, the film thickness is 118.9μm, the Rod diaMeter is 9.5mm, the total length is 40cm, and the effective application width is 30cm.
Using formed process, film thickness 29.7 μ m, diaMeter 9.52mm, total length 400mm, application width 300mm, stainless steel material, no wire-wound design.
Formed to achieve 35 micron wet film thickness, uniform film and good repRoducibility, 304 stainless steel material to ensure durable and easy to clean.
A groove control film is formed on the smooth Rod body by extrusion process. The wear-resistant stainless steel material is not easy to break the wire and is easy to clean. The wet film thickness is 105.2 μ m and the application width is 300mm.
Using a formed process, the film thickness is 68.6 μm, the accuracy is 0.1 μm, the total length is 40cm, the effective application width is 30cm, and the stainless steel material ensures durability and conformity.
The formed process achieves 118.9 μm film thickness with an accuracy of 0.1 μm, providing a uniform Spreader effect, and different diaMeter Rods can be selected to meet various needs.
The formed pRoduction process is easy to clean and maintain, providing an accurate wet film thickness of 57.2 μm, and the stainless steel material ensures durability and stable Spreader effect.
Using a formed pRoduction process, the film thickness is 9.1 μm, the total length is 400mm, and the application width is 300mm. The stainless steel material ensures durability and accurate Spreader effect.
Formed to achieve 52.6 micron precision film, 304 stainless steel material provides high Abrasion Resistance, 50mm at both ends of the hand part without additional handle, can be directly matched with the experimental Film Applicator.
The formed process is used to achieve 300μm wet-film scraping, with a total length of 400mm and a width of 300mm Spreader. The wear-resistant stainless steel material ensures that the cleaning is not blocked and the service life is long.
Using a formed pRoduction process, the film Film thickness is as thin as 4.6μm, the accuracy is up to 0.1 micron, and the effective Spreader width is 30cm. It can be used with an automatic Film Applicator and has the advantage of continuous wire.
Spreader formed to ensure uniform film thickness 41.1 μm, diaMeter 9.52mm, total length 400mm, application width 300mm, stainless steel durable and easy to clean.
Formed process preparatory 125.7μm wet-film, stainless steel material to ensure durability, application width 300mm to meet a variety of experimental needs.
Adopt formed pRoduction process, wet film thickness 59.4 μ m, precise control of Spreader thickness through groove, use 304 stainless steel material, wear-resistant and easy to clean, continuous wire.
Spreader formed process to ensure uniform, wet film thickness 36.6μm, application width 300mm, suitable for accurate film thickness control, the total length of 400mm easy to operate.
