The grinding head reciprocates within 110mm Travel, and the Friction Frequency is adjustable from 20 to 60cpm. It cooperates with 1000g weight to test Abrasion Resistance under different pressures, and the digital display counter directly displays the number of frictions.
Can test inks multi-directional adhesion at the same time, Friction Frequency 43cpm, Friction Load 2lb/4lb, Abrasion Resistance evaluation by measurement density or Coating thickness reduction, support 0-99999 automatic shutdown.
Using reciprocating motion to simulate transportation abrasion, Friction Frequency 0~ 2.5Hz adjustable, Test Travel 12.7~ 50.8mm, support continuous test 0~ 24 hours, suitable for a variety of can sizes and pressure conditions.
Adopt reciprocating friction method, Friction Frequency 0~ 2.5Hz, Test Travel 12.7~ 50.8mm, can simulate coating abrasion during transportation, support continuous test 0~ 24 hours.
With four-speed friction Frequency adjustable to 106cpm, friction load 20N, using an integrated precision grinder to ensure stable testing without jitter, embedded friction table to ensure uniform friction area and silent operation.
With four adjustable friction Frequency 21/43/85/106cpm, friction load 20N, support linear reciprocating friction movement, power-off memory function to ensure that paraMeters are not lost, effective analysis of coating adhesion and wear resistance performance.
Double abrasive wheels swirl/spin friction design, adjustable friction load 500g to 1000g, working wheel Rotation speed 60rpm, to achieve non-directional abrasion, closer to the actual use of the scene.
Using reciprocating friction method, friction load 500g, Friction Frequency 40 +/- 2 times/minute, can simulate drying or wet conditions for material wear-resistant decolorization test.
The equipment adopts reciprocating friction method, load range 0~ 3kg, Frequency 60 +/- 1cpm, Test Travel 90mm, no need to chill down liquid, no more dust, easy to operate.
Four-speed Friction Frequency Adjustable to 106cpm, Friction Load Standard 20N, Rubber Test Block integrated sanding to ensure stability without jitter, embedded friction table to provide uniform friction area, the test process silent operation.
Using microcomputer control to achieve automatic testing, equipped with High Accuracy force sensor accuracy of 0.001N, special drive system running smoothly, can simultaneously measure static friction and dynamic Coefficient of Friction.
Based on the national standard design, the static Coefficient of Friction and the dynamic Coefficient of Friction can be measured simultaneously, with a test accuracy of up to 0.001N, equipped with High Accuracy Sensor and special drive system to ensure smooth operation and accurate results.
Can simultaneously detect dynamic and static Coefficient of Friction, force range 0~ 5N, accuracy level 1, support microcomputer control and micro printer output test report.
Using microcomputer control to achieve automatic testing, equipped with High Accuracy force sensor accuracy of 0.001N, special drive system running smoothly, can simultaneously measure static friction and dynamic Coefficient of Friction.
Automatic measurement and display of dynamic and static Coefficient of Friction, Measurement accuracy +/- 1%, slider traverse speed 100mm/min, stable performance, accurate testing, complete functions, easy to operate.
