The four-guide column structure is adopted to ensure smooth sliding and high accuracy, the knife die life is ≥ 30,000 times and there is no burr Linting defect, the maximum punching size is 100mmx140mm, and the volume is small and safe to operate.
Adopt drawdown Bar & blade double coating method, coating speed 1-300mm/s stepless speed regulation, equipped with Vacuum chuck and heating function, closed-loop motor to precisely control the scraping distance and speed.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Using 3mm thick A3 steel plate and SUS201 stainless steel inner box, the size of each test box is 500 * 500 * 500mm, with pressure relief device and temperature and pressure control, effectively preventing battery explosion and ensuring safe operation.
High Accuracy Electromagnetic Force Sensor, repeatability error +/- 2mg, 5-inch color Touchscreen for glove operation, automatic internal calibrating and Sensor transport protection.
Adopt three-box heat storage and cold storage structure, temperature conversion time ≤ 10 seconds, Temperature range -65 ℃~ + 150 ℃, with independent temperature control functions in high temperature zone, low temperature zone and test zone, and can perform 2-box or 3-box Impact mode.
High Accuracy Electromagnetic Force Sensor with accuracy of 0.1mg, 5 inch Color Touchscreen supports glove operation, provides automatic internal calibrating and a variety of weighing units to ensure stable and reliable measurement.
Spreader thickness accuracy of +/- 0.003mm, adjustable rate of 5~ 200mm/s, support Vacuum chuck and heating to 180 ℃, suitable for a variety of substrates and laboratory environments.
Using a new generation of electromagnetic force Sensor, weighing accuracy of 1mg, repeatability error +/- 2mg, equipped with a 5-inch color Touchscreen to support glove operation, with automatic internal calibrating and transport protection devices.
Built-in mobile slide table can move the camera front and rear, high display finger no stroboscopic LED Illuminant Color temperature is stable, the illuminance is adjustable, the back plate of the box can post 712mm * 400mm test card to provide a uniform lighting environment.
Stainless steel combustion box flue gas and corrosion resistance, Control system Degree of automation, flame time 0-99 minutes and 99 seconds adjustable, flame height 20-100mm adjustable, automatic recording of the test process.
With a standard 45 degree tilt angle, the same as the light box base color does not interfere with the viewing effect, Dimension 395 * 350mm, weight 1.2Kg, flexible placement and easy to disassemble and transport.
Adopt two-box mobile structure, air pressure drive test object Impact, Thermal Shock mechanism moving time within 10 seconds, temperature recovery time within 5 minutes, in line with MIL and other international test standards.
Adopt mirror stainless steel argon arc welding box, Temperature range 10~ 200 ℃, Temperature Uniformity +/- 3%, equipped with microcomputer P.I.D temperature controller and hot air circulation system, can adjust the intake and exhaust volume.
Using two-box mobile Impact structure, Thermal Shock mechanism moves within 10 seconds, temperature recovery time ≤ 5 minutes, equipped with rigid polyurethane foam insulation material, effective energy saving and waterproof and moisture proof.
