With 5~ 3000N force value range and +/- 1% accuracy, support ring pressing, side pressing, flat pressing and adhesive strength detection, using 3.2 inch LCD display and thermal printout.
Using 0.01N High resolution Force Value Sensor, equipped with 12.5mm/min constant speed pressurization system, support ring pressure, side pressure, flat pressure, adhesive strength and other test modes, to meet a number of national standards.
Equipped with a digital ruler to collect displacement data, the resolution is up to 0.01mm, the maximum measurement load is 500N, the base has a mobile platform for easy installation of fixtures, and the side handwheel is easy to load and operate.
It adopts trapezoidal screw drive and side handwheel loading mode, which is stable and easy to operate. It is equipped with a mobile base platform, which can realize free movement of front, rear, left and right. The rated load is 500N, and the Test Travel is up to 250mm, which meets a variety of mechanical testing requirements.
Cantilever structure to prevent liquid infiltration, large proportion of chilled down surface uniform heat dissipation, Speed range 60~ 2000rpm, Max. Torque 1850gcm, suitable for viscosity of 10000mPa · s liquid stirring.
The colony contrast is clear by using ring lamp side-shot illumination, equipped with three-digit display and counting probe pen, the counter capacity is 0-999, and it has a 30-day charging standby function, which can reduce the experimental labor intensity.
High Accuracy Sensor, accuracy of +/- 1%, capacity of 200KG, can test a variety of strength performance, force value unit can be freely switched, safe and convenient operation.
It has the function of automatically calculating the edge pressure strength of the ring, no need to calculate by hand to reduce the error; the self-contained stacking test can set the force time; three adjustable speeds, the accuracy is +/- 1%, and the maximum load is 2KN.
It has the function of automatically calculating the edge pressure strength of the ring, no need to calculate by hand; it has its own stacking test, and can set the force time; three adjustable speeds, accuracy +/- 1%, force resolution 1N, and automatically saves 20 sets of data.
With 0.5 accuracy and +/- 0.5% FS Precision, it supports four unit automatic conversion and peak hold, and features a dual display design with overload alarm function.
With dual unit display function, Indication Error is only +/- 1%, push-pull Rod Travel 10mm, handheld design is compact and portable, and can be adapted to a variety of fixtures and tables for accurate measurement.
Portable design, compact size, accuracy of +/- 1%, with peak hold and real-time load switching function, dual unit display without conversion, Maximum Measured value 50kg.
Using high precision Sensor and Glass Draft Shield, weighing accuracy of 0.001g, Stabilization time ≤ 3 seconds. Configure battery to realize AC and DC dual-use, with counting, unit conversion and other practical functions.
Simultaneous sampling ECT (100 * 25) mm and PAT (80 * 25) mm two sizes, sampling error +/- 0.5mm, thickness range ≤ 10mm, easy to operate.
With 0.1~ 200000 Lux wide range, support Lux and FC dual unit measurement, with MAX Maximum hold and low voltage indication function, compact and portable.
