Overview
The FANGRUI FA1104 Electronic Analytical Balance is controlled by a high-performance single-chip microprocessor to ensure high Precision and high Stability of weighing results. It has a standard RS232 interface output and can be directly connected to external devices such as printers and computers. It can meet all laboratory mass analysis requirements.
Features
1. STN wide viewing angle backlight LCD display
2. Multiple Measurement Unit Conversion
3. Automatic zero tracking
4. Dynamic temperature compensation
5. Full scale automatic calibration
6. Full range to tare weight
7. Automatic fault diagnosis
8. Overload alarm
9. Overload protection
10. RS232 data output
Principle
The Electronic Analytical Balance is controlled by a high-performance single-chip microprocessor, combined with technologies such as dynamic temperature compensation, to ensure the Stability of the weighing process and the accuracy of the results.
Applications
Industrial and mining enterprises, research institutions, Universities & colleges, Gold & Jewelry sector
Steps
1. Place Balance on a smooth workbench.
Connect the power supply (220V 50Hz).
3. Turn it on and warm up, wait for Balance self-test and stability.
4. Perform full-scale automatic calibration (if required).
5. Place the item to be weighed on the pan (φ 90mm).
6. Read the stable mass data displayed on the STN wide viewing angle backlit LCD screen.
7. If you need to peel, use the peeling function.
8. External devices can be connected to output data through the RS232C interface.
Notice
• Please use the Balance on a smooth, vibration-free countertop.
• Power supply voltage is 220V 50Hz before use.
• Pay attention to the weighing range (0~ 110g) and Minimum Weight (0.1mg) to avoid overloading.
• When there is an overload alarm, please remove the overweight items immediately.
• Regular calibrating and maintenance to ensure weighing accuracy.
• Keep the pan clean and avoid direct contact with corrosive substances.
When connecting external devices, ensure that the interface matches (RS232C).
