Overview
CHANGLONG SW-80 (red) temperature indicator is a temperature monitoring product for the bus connection part of the substation. It can supplement the shortcomings of general thermometers, detect temperature abnormalities in time and take measures to prevent accidents. It can also be used for the connection between the bus and electrical equipment, the isolation switch contacts, transformers, motors, capacitors and other electrical equipment such as bearings and bushings. Measuring temperature and monitoring safe operation.
Features
1. Precision is high, the error between the melting temperature and the rated temperature of the temperature indicator is +/- 1 ℃.
2. Good safety, allowing the melting of the temperature indicator to be observed away from the bus or electrical equipment.
3. Easy to use, simply stick the temperature indicator sheet on the bus or electrical equipment to monitor the temperature.
4. Intuitive, it is clear at a glance whether the temperature indicator is melted on the bus or electrical equipment.
Principle
When the temperature rises to the rated temperature (e.g. 80 ° C), the temperature indicator melts, and the temperature abnormality is visually displayed, so that problems can be detected and dealt with in a timely manner during inspection.
Applications
Substation busbar connection parts, equipment terminals connected between busbars and electrical equipment, disconnector contacts, transformers, motors, capacitors and other electrical equipment, bearings, bushings and other non-electrical equipment
Steps
1. Paste the temperature indicator sheet on the bus or electrical equipment.
2. Observe whether the temperature plate melts during the inspection.
Notice
• Make sure to stick firmly and avoid peeling.
• Regularly inspect and check the status of the temperature indicator.
• Take appropriate treatment measures immediately when melting is found.
