Overview
HUITAI MJ-250-II mildew incubator is a thermostatic device specially used for mold, bacteria, microbial fostering, preservation, plant cultivation and breeding experiments. It is widely used in scientific research, universities and production departments in the fields of environment protection, drug inspection, agriculture, livestock, aquatic products, etc. It is also suitable for water analysis and BOD determination.
Features
1. Standard large-screen LCD display, menu-type operation interface, multiple sets of data displayed on one screen, easy to operate.
2. Mirror stainless steel liner, four corners and half arc design, easy to clean, adjustable Shelf spacing in the box.
3. Adopt brand Compressor and self-developed cooling system to effectively prolong the service life of Compressor.
4. Adopt JAKEL tube flow circulating fan and unique air duct design to ensure good air circulation and uniform temperature in the box.
Adopt PID control mode, high temperature control accuracy, small fluctuation, and have timing function (maximum setting 99 hours 59 minutes).
6. The top layer of the box is equipped with an ultraviolet sterilization system, which can effectively kill floating bacteria in the circulating air and prevent foster pollution.
7, equipped with microcomputer humidity control system, effectively ensure the accuracy of humidity control.
Principle
The equipment precisely adjusts the temperature and humidity in the box through a microcomputer control system (PID control). The brand Compressor refrigeration system and JAKEL pipe flow circulating fan are combined with a unique air duct to achieve forced circulation of the air in the box to ensure uniform and stable temperature. At the same time, the top layer of the ultraviolet sterilization system continuously sterilizes the circulating air to maintain the cleanliness of the foster environment and prevent microbial contamination.
Applications
Environment protection, drug inspection, agriculture and livestock, aquatic products, scientific research, colleges and universities, production departments, water analysis, BOD determination, bacterial fostering, mold fostering, microbial fostering and preservation, plant cultivation, breeding experiments
Steps
1. Connect the power supply (AC 220V, 50Hz).
2. Through the large-screen LCD display interface, use the menu to set the required temperature, humidity, and timing time.
3. Place the sample to be fostered on the shelf with adjustable spacing in the box.
4. Close the box door and start the equipment running.
5. During the operation of the equipment, the UV sterilization system works simultaneously.
6. After reaching the set time or the end of the experiment, remove the sample and turn off the power of the device.
Notice
Equipment should be placed in a well-ventilated environment with Ambient Temperature recommended between room temperature and 45 ° C.
• Do not set the temperature below 10 ° C without humidification function, or set the temperature below 15 ° C in humidification mode.
• Pay attention to the equipment power (1050W) and ensure that the power load matches the voltage (AC 220V).
• When cleaning the liner, please use its mirror stainless steel and arc design, and operate with care.
• When the UV sterilization system is working, please avoid looking directly at the UV light source, and can be equipped with an observation window (optional) if necessary.
The net weight of the equipment is 190Kg, and it is necessary to pay attention to safety when moving or installing to prevent dumping.
• Optional independent temperature limit alarm system to enhance the safety of the experimental process.
