Overview
YIHENG LRH-100CA cryogenic incubator is an efficient and energy-saving cryogenic equipment, using brand Compressor and circulating fan, with environmentally friendly refrigerant, cooling time is reduced by more than 40% compared with traditional cryogenic equipment, widely used in storage of foster base, serum, medicine and microbial foster, environmental testing and other fields.
Features
1. Mirror stainless steel liner, four corners semicircular arc transition, shelf bracket can be freely loaded and unloaded, easy to clean.
2. Microcomputer temperature controller that quickly reaches the set point and operates accurately and stably.
3. Brand Compressor and circulating fan, environmentally friendly refrigerant (R134a), high efficiency and low energy consumption.
4. There is a 25mm diameter test hole on the left side of the box, which is convenient for experimental operation and temperature measurement.
5. Independent temperature limit alarm system, automatic interruption over temperature to ensure experimental safety.
6. Optional printer or RS485 interface can be used to record temperature parameter changes.
7. Optional multi-stage programming function, Menu Operating interface, simplify the complex test process.
Principle
The cryogenic incubator drives the environmentally friendly refrigerant (R134a) through the brand Compressor and circulating fan for refrigeration cycle. The microcomputer temperature controller precisely adjusts the temperature in the box to achieve rapid cooling and maintain stability. Optional multi-stage programming controller for automatic control and operation.
Applications
Storage foster bases, serums, pharmaceuticals, microbial foster, environmental testing
Steps
1. Connect the power supply (AC 220V 50Hz).
2. Set the required temperature parameters through the microcomputer temperature controller.
3. Optional multi-stage programming controller, preset temperature, time and other programs.
4. Start the device and monitor the running status.
5. Use the test hole for experimental operation or temperature measurement.
6. After the experiment, turn off the power and clean the liner.
Notice
• Ambient Temperature should be maintained at + 5~ 35 ℃.
• Power supply voltage is AC 220V 50Hz.
• When the temperature is exceeded, the independent temperature limit alarm system will automatically interrupt the operation.
• Pay attention to loading and unloading shelf brackets when cleaning.
• Optional functions require additional configuration.
