Overview
YIHENG LRH-100CB cryogenic incubator is a high-efficiency and energy-saving equipment, using brand Compressor and circulating fan, with high efficiency and low energy consumption. Compared with traditional cryogenic equipment, the cooling time is reduced by more than 40%, and the service life is long and the noise is low. Widely used in the storage of foster bases, serums, products and microbial foster, environmental testing and other fields.
Features
1. Mirror stainless steel liner, four corners semicircular arc transition, shelf bracket can be freely loaded and unloaded, easy to clean the box.
2. Adopt a microcomputer temperature controller to quickly reach the set value and operate accurately and stably (standard digital controller).
3. Brand Compressor and circulating fan, ring · Bao · type refrigerant (R134a) high efficiency, low energy consumption, promote energy saving.
4. There is a 25mm diameter test hole on the left side of the box, which is convenient for experimental operation and Measuring temperature.
5. It is equipped with an independent temperature limit alarm system, which automatically interrupts when the temperature exceeds the limit to ensure the safe operation of the experiment (standard).
6. Can be equipped with a printer or RS485 interface, used to connect the printer and computer to record changes in temperature parameters (optional).
7. Multi-stage programming function, Menu-type Operating interface, simplify the complex test process, realize automatic control and operation (optional).
8. LCD multi-segment programmable controller (optional), Multi-Parameter one-screen display, can set temperature, circulating wind speed, time and heating rate, etc., preset automatic boot, standby and shutdown functions, support 7 sets of 63-step programmable.
Principle
The cryogenic incubator precisely controls the temperature through a microcomputer temperature controller, and uses a brand Compressor and circulating fan combined with a ring-type refrigerant (R134a) to achieve efficient refrigeration and circulation, quickly reaching the set temperature and maintaining stability. The multi-stage programming function allows users to preset parameters such as temperature and time for automated operation.
Applications
Storage foster base, serum, product, microbial foster, environmental testing
Steps
1. Connect the power supply (AC 380V 50Hz).
2. Set the required temperature and Miscellaneous parameters through the microcomputer temperature controller (e.g. optional multi-stage programming function, preset temperature, time, etc.).
3. Place the sample on the shelf.
4. Start the device and monitor the temperature change (can be measured through the test hole).
5. During the operation of the equipment, an independent temperature limiting alarm system ensures safety.
6. After running, turn off the power and clean the liner (shelf bracket removable).
Notice
• Ambient Temperature should be maintained at + 5~ 35 ℃.
• Power supply voltage must be AC 380V 50Hz to avoid improper use.
• When the equipment is running, do not block the test hole to ensure accurate measurement.
• Regularly clean the liner and use removable shelves for easy maintenance.
• When the temperature limit is exceeded, the alarm system will automatically interrupt and needs to be checked in time.
• Optional functions such as printer or multi-segment programming need to follow the instructions.
• Pay attention to the weight (Net weight 279Kg) when handling to avoid damage.
