Overview
YIHENG LRH-500CA cryogenic incubator is an efficient and energy-saving cryogenic equipment, using brand Compressor and circulating fan, environmentally friendly refrigerant (R134a), compared with traditional cryogenic equipment to reduce the cooling time by more than 40%, widely used in storage foster base, serum, medicine and microbial foster, environmental testing.
Features
1. Mirror stainless steel liner, four corners semicircular arc transition, shelf bracket can be freely loaded and unloaded, easy to clean.
2. Microcomputer temperature controller that quickly reaches the set point and operates accurately and stably.
3. Brand Compressor and circulating fan, environmentally friendly refrigerant (R134a), high efficiency, low energy consumption, promote energy saving.
4. There is a 25mm diameter test hole on the left side of the box, which is convenient for experimental operation and Measuring temperature.
5. Independent temperature limit alarm system, which automatically interrupts when the temperature exceeds the limit to ensure the safety of the experiment.
6. Can be equipped with a printer or RS485 interface to record temperature parameter changes (optional).
7. Multi-stage programming function, Menu-type Operating interface, simplifies the complex test process, and realizes automatic control (optional).
8. LCD multi-stage programmable controller (optional), a variety of parameters are displayed on one screen, temperature, circulating wind speed, time and heating rate can be set, etc., and 7 sets of 63-step programs are preset.
Principle
The cryogenic incubator precisely controls the temperature in the box through a microcomputer temperature controller, uses a brand Compressor and circulating fan to achieve efficient refrigeration and air circulation, and an environmentally friendly refrigerant (R134a) ensures low energy consumption and environmental performance. The multi-stage programming function allows users to set complex temperature programs for automatic operation.
Applications
Storage foster bases, serums, pharmaceuticals, microbial foster, environmental testing
Steps
1. Connect the power supply (AC 380V 50Hz).
2. Use a microcomputer temperature controller to set the required temperature and Miscellaneous parameters.
3. Optional multi-stage programming function, preset temperature, time and other programs.
4. Start the device and monitor the running status.
5. After the experiment is completed, turn off the power and clean it.
Notice
• Ensure that the Working Ambient Temperature is within the range of + 5~ 35 ° C.
• Power supply voltage check before use meets AC 380V 50Hz requirements.
• Clean liners and shelves regularly to maintain hygiene.
• Pay attention to the independent temperature limit alarm system to avoid temperature overrun.
• Optional features require additional configuration, such as printers or multi-stage programmers.
