Overview
YIHENG LRH-500CB cryogenic incubator is an efficient and energy-saving cryogenic equipment, using brand Compressor and circulating fan, with high efficiency and low energy consumption. Compared with traditional cryogenic equipment, the cooling time is reduced by more than 40%, and the service life is long and the noise is low. Widely used in storage foster base, serum, products and microbial foster, environmental testing and other fields.
Features
1. Mirror stainless steel liner, four corners semicircular arc transition, shelf bracket can be freely loaded and unloaded, easy to clean.
2. Microcomputer temperature controller that quickly reaches the set point and operates accurately and stably.
3. Brand Compressor and circulating fan, environmentally friendly refrigerant (R134a), high efficiency, low energy consumption and energy saving.
4. There is a 25mm diameter test hole on the left side of the box, which is convenient for experimental operation and Measuring temperature.
5. Independent temperature limit alarm system, automatic interruption over temperature to ensure experimental safety.
6. Can be equipped with a printer or RS485 interface to record temperature parameter changes (optional).
7. Multi-stage programming function, Menu-type Operating interface, simplifies the complex test process, and realizes automatic control (optional).
8. LCD multi-segment programmable controller, Multi-Parameter one-screen display, can set temperature, circulating wind speed, time, heating rate, etc., preset automatic boot, standby and shutdown (optional).
9. 7 groups of 63 steps can be programmed, each group of 9 steps, and the setting time is 1 to 9999 minutes.
Principle
The cryogenic incubator precisely controls the temperature through a microcomputer temperature controller, uses a brand Compressor and circulating fan to achieve efficient refrigeration and air circulation, uses an environmentally friendly refrigerant (R134a) to reduce energy consumption, and ensures that the temperature in the box reaches the set value quickly and stably.
Applications
Storage foster base, serum, product, microbial foster, environmental testing
Steps
1. Connect the power supply (AC 380V 50Hz).
2. Set the required temperature parameters through the microcomputer temperature controller.
3. Optional multi-stage programming function, preset temperature, time, wind speed and other parameters.
4. Start the device and monitor temperature changes.
5. Use the test hole for experimental operation and temperature measurement.
6. After the experiment, turn off the power and clean the liner.
Notice
• Ambient Temperature should be maintained at + 5~ 35 ℃.
• Power supply voltage is AC 380V 50Hz to avoid voltage instability.
• When the temperature is exceeded, the independent temperature limit alarm system will automatically interrupt and need to be dealt with in time.
• When cleaning the liner, remove the shelf support.
• Optional features such as printer, RS485 interface or multi-segment programming require additional configuration.
• Regularly check the operating status of the Compressor and circulating fan.
• Avoid use in humid or corrosive environments.
