Overview
YIHENG DHP-9012B Electric heated incubators of constant temperature is a thermostatic device with LCD controller. Temperature range is RT + 5~ 65 ℃, with 16L volume, suitable for experimental environments such as cell foster. The product adopts mirror stainless steel liner and electric heating film Heating mode to ensure uniform and fast heating.
Features
1. Fuzzy PID controller, with accurate temperature control and small fluctuations, with timing function, the maximum setting value of time is 99 hours and 59 minutes.
2. The forced convection duct system can improve the Temperature Response Speed, improve Temperature uniformity and reduce temperature fluctuation.
3. There is a layer of Glass door on the inner layer of the box door, which is convenient and clear to observe. When the Glass door is opened, the breeze circulation and heating will automatically stop, and there will be no temperature overshoot.
4. Mirror stainless steel liner, Electric heating film Heating mode, heating speed, so that the box uniform heating.
5. Independent temperature limit alarm system, which automatically interrupts when the temperature exceeds the limit to ensure the safe operation of the experiment without accidents. (optional)
6. Can be equipped with printer or RS485 interface, used to connect printer or computer, can record the change of temperature parameters. (optional)
7. The circulating fan speed is automatically controlled. When the temperature in the box is in a thermostatic state, the speed will be reduced, and the circulating wind speed will be adjusted to the wind speed suitable for cell growth to avoid the volatilization of the sample due to excessive air volume during the test.
8. Multi-segment programmable controller (optional), multi-segment LCD programmable controller, one-screen display of various parameters, menu-type Operating interface, which can simplify the complex test process and truly realize automatic control and operation.
9. Parameters such as multi-stage temperature, circulating wind speed, time and heating rate can be set and programmed at the same time, layer control of temperature rise can be carried out, and functions such as slow heating from the initial temperature in the box can also be preset for automatic startup, standby and shutdown.
10. 7 groups of 63 steps can be programmed, each group of 9 steps, and the setting time of each group is 1 to 99 hours and 59 minutes.
11. Safety features include an independent temperature limit alarm system, and sound and light alarms prompt the operator to ensure safe operation without accidents. (optional)
12. High or low temperature and over-temperature alarm.
13. Ultraviolet sterilization system (optional) can regularly disinfect the inside of the box, which can effectively kill the floating bacteria in the circulating air in the box, thereby effectively preventing the pollution during the cell fostering.
Principle
The incubator precisely controls the temperature with a fuzzy PID controller, and uses a forced convection air duct system to improve temperature Response speed and uniformity. The electric heating film Heating mode quickly unifies the heating liner, and the circulating fan speed automatically adjusts to maintain the appropriate wind speed. When the box door is opened, the breeze circulation and heating automatically stop, preventing temperature overshoot.