Overview
YIHENG DHP-9162 Electric heated incubators of constant temperature is a thermostatic device with fuzzy PID controller, with accurate temperature control and small fluctuations, with timing function, and the maximum time setting is 99 hours and 59 minutes. The product has a forced convection air duct system, which can increase the temperature Response speed, improve Temperature uniformity and reduce temperature fluctuations. It is suitable for experimental environments such as cell foster.
Features
1. Fuzzy PID controller, with accurate temperature control and small fluctuations, with timing function, the maximum setting value of time is 99 hours and 59 minutes.
2. The forced convection duct system can improve the Temperature Response Speed, improve Temperature uniformity and reduce temperature fluctuation.
3. There is a layer of Glass door on the inner layer of the box door, which is convenient and clear to observe. When the Glass door is opened, the breeze circulation and heating will automatically stop, and there will be no temperature overshoot.
4. Mirror stainless steel liner, Electric heating film Heating mode, heating speed, so that the box uniform heating.
5. Independent temperature limit alarm system, which automatically interrupts when the temperature exceeds the limit to ensure the safe operation of the experiment without accidents. (optional)
6. Can be equipped with printer or RS485 interface, used to connect printer or computer, can record the change of temperature parameters. (optional)
7. The speed of the circulating fan is automatically controlled. When the temperature in the box is in a thermostatic state, the speed is reduced, and the wind speed suitable for cell growth is adjusted to avoid volatilization of the sample due to excessive air volume during the test.
8. Multi-segment programmable controller (optional), multi-segment liquid crystal programmable controller, one-screen display of various parameters, menu-type Operating interface, simplifying the complex test process, realizing automatic control and operation.
9. Parameters such as multi-stage temperature, circulating wind speed, time and heating rate can be set and programmed at the same time, and layer control of temperature rise can be carried out, and the initial temperature in the box can be slowly heated up, and functions such as automatic startup, standby and shutdown can also be preset.
10. 7 groups of 63 steps can be programmed, each group of 9 steps, and the setting time of each group is 1 to 99 hours and 59 minutes.
11. Independent temperature limit alarm system, and sound and light alarm prompt the operator to ensure safe operation without accidents. (optional)
12. High or low temperature and over-temperature alarm.
13. Ultraviolet sterilization system (optional), can regularly disinfect the inside of the box, effectively kill the floating bacteria in the circulating air in the box, and prevent pollution during cell fostering.
Principle
Electric heated incubators of constant temperature precisely control the temperature through a fuzzy PID controller, using an electric heating film Heating mode for rapid heating, combined with a forced convection air duct system to improve temperature Response speed and uniformity. Automatic control of circulating fan speed, adjusting the wind speed in the thermostatic state to adapt to the needs of cell growth. Glass doors are designed to automatically stop breeze circulation and heating when opened to prevent temperature overshoot.