Overview
SDPTOP MP5002J electronic density Balance is a precision instrument dedicated to density measurement, combined with electronic Balance and density measurement device, can directly read the density value to two decimal places, suitable for a variety of solid and liquid materials density test.
Features
1. Electronic Balance with density measurement device, measuring the effective digits of density (g/cm ³) to two digits after the decimal point; 2. Direct density reading, minus cumbersome calculations; 3. Solid and liquid density measurement, standard liquid density selection; 4. Aluminum base design to prevent low frequency vibration and enhance weighing Stability.
Principle
Electronic Balance measurement is used to measure the mass of the measured object in air and the buoyancy received in water, and the density value is calculated in combination with the density measurement device to realize the density direct reading function.
Applications
Research Institute, Electronics Industry, Rubber Industry, Wire and cable manufacturing, Food Industry, Cosmetics Industry, Paper Industry, Machining Industry, Powder Metallurgy Industry, Automotive Industry
Steps
1. Connect the density measurement device; 2. Use the external test weight to calibrate Balance; 3. Place the measured object to measure the mass in the air; 4. Measure the buoyancy in the water; 5. Read the density value directly.
Notice
• The mass in the air of the measured object should be ≥ 0.25g; • The buoyancy in the water of the measured object should be ≤ -0.125g; • Use the external test weight to calibrate; • Ensure the stability of the environment and avoid low-frequency vibration affecting the Measurement accuracy.
