Overview
BS-1 Closed Cup Flash Point Tester conforms to GB/T261 ISO2719 standard and is used to determine the closed flash point value of petroleum products. The instrument adopts the continuous temperature regulation mode of solid state voltage regulator, automatic Stir, standard heating speed, and has the advantages of accurate measurement, reasonable structure and easy operation.
Features
1. Comply with GB/T261 ISO2719 standard.
2. Adopt solid-state voltage regulator to achieve continuous temperature regulation.
3. With automatic Stir function.
4. The heating rate meets the standard.
5. Accurate measurement, reasonable structure and easy operation.
Principle
The instrument continuously adjusts the temperature of the heating system through the solid-state pressure regulator, so that the sample is heated according to the standard heating rate, and the sample is automatically Stir. When the mixture of sample vapor and air touches the test flame under specific conditions, the temperature at this time is recorded, which is the closed flash point value.
Applications
Petroleum product testing
Standards
GB/T261、ISO2719
Steps
1. Prepare the sample and load it into the instrument.
2. Turn on the power and start the automatic Stir.
3. Set and control the heating rate through the solid state voltage regulator.
4. Test according to the standard method, observe and record the flash point temperature.
Notice
Please ensure that the power supply is 220VAC and 50Hz before use.
• Please pay attention to high temperature parts during operation to avoid burns.
The instrument should be placed on a stable workbench.
• Regular maintenance to ensure measurement accuracy.
