Overview
DAQTECH TCK-2003 Furnace temperature tracker is a compact and powerful professional mobile phone UV painting furnace temperature Linear dispersion tester, specially designed for mobile phone UV painting tunnel furnaces. The instrument adopts K-type Thermocouple, has good Linearity, Stability and Uniformity, is equipped with 3 test channels, Measurement accuracy is +/- (0.1% + 1 ℃), and is equipped with a special test fixture and professional analysis software to provide users with accurate and effective furnace temperature tracking Linear dispersion testing and analysis.
Features
1.3 test channel design
2. Using K-type Thermocouple, Good Linearity, High Stability and Good Uniformity
3. Measurement accuracy up to +/- (0.1% + 1 ℃)
4. Equipped with special test fixtures
5. Equipped with professional analysis software
6. Compact size, easy to carry and use
7. Built-in rechargeable battery power supply
8. Support RS-232 and USB connection methods
9. Sampling interval can be set by software (0.25-600 seconds)
10. Storage capacity up to 80,000 points/channel
Principle
The TCK-2003 Furnace temperature tracker collects temperature data through the K-type Thermocouple Probe to record the temperature change in the furnace at a set Sampling interval. The instrument supports three starting modes of manual, specified time and specified temperature, and has two Operating Modes for real-time monitoring and recording. The collected data can be transferred to the analysis software for processing and analysis through the RS-232 or USB interface.
Applications
Mobile phone shell painting, similar coating process
Steps
1. Set the oven temperature zone temperature and transportation speed
2. Configure the location name of the temperature sampling point and the schematic diagram of the workpiece
3. Select the startup mode (manual, specified time or specified temperature)
4. Place the instrument in the test position to start recording
5. Transfer data to analysis software via RS-232 or USB connection
6. Linear dispersion analysis and data processing using analysis software
Notice
Measurement time is 35-40 minutes in 300 ℃ environment when the instrument is equipped with heat insulation box
• Make sure the battery is fully charged before use
• Interface type (RS-232 or USB) when connecting devices
• When setting the Sampling interval, it needs to be adjusted according to the actual test requirements
• Analysis Software supports Chinese and English language switching
• Pay attention to file format compatibility when exporting data to Excel
