Overview
DAQTECH DT-600 Furnace temperature tracker is a four, six, nine-channel professional furnace temperature Linear dispersion instrument. It adopts K-type Thermocouple, the temperature measurement range is 0~ 1000 degrees Celsius, and can store 20 sets of data. It can connect to PC operation data through RS-232, USB, and RF communication ports. DT-600 Furnace temperature tracker is a professional oven, tunnel furnace, and oven Furnace temperature tracker in China. It has professional hardware and software design to provide accurate and effective furnace temperature Linear dispersion testing and analysis to users.
Features
1. Four, six, and nine channels are optional to adapt to different testing requirements
2. K type Thermocouple, temperature range 0~ 1000 ℃
3. Can store 20 sets of data
4. Support RS-232, USB, RF communication ports
5. Built-in rechargeable battery, Total Power ≤ 100mW
6. Equipped with Baking-Profiling Chinese and English analysis software
7. Sampling interval 0.25-600 seconds can be set by software
8. Storage capacity up to 80,000 points/channel
9. resolution 0.1 ℃ (full scale)
10. Temperature measurement accuracy +/- (0.1% + 1 ℃)
Principle
The DT-600 Furnace temperature tracker collects temperature data through K-type Thermocouple, records temperature changes at a settable Sampling interval of 0.25-600 seconds, and stores the Data in the device memory. Connect to the PC through RS-232, USB or RF communication ports, and use Baking-Profiling analysis software to process, analyze and display the collected temperature data to generate a detailed furnace temperature Linear dispersion report.
Applications
Automobile painting, Powder painting, Non-stick Coating painting, Mobile phone screen, Food processing, Chemical industry, Glue curing, Hardware Eletroplating
Steps
1. Set the oven temperature zone temperature and transportation speed
2. Configure the location name of the temperature sampling point and the schematic diagram of the workpiece
3. Select one of the three start-up methods: manual, specified time or specified temperature
4. The device starts recording temperature data
5. Connect to PC via RS-232, USB or RF
6. Use Baking-Profiling software to analyze temperature data
7. Export the temperature data report to Excel for editing
8. You can choose to clear the device memory data manually or by software
Notice
• The temperature measurement range of the equipment is 0~ 1000 ° C, please do not use beyond this range
• Make sure the built-in battery is fully charged before use
When connecting to a PC, select the appropriate communication port (RS-232/USB/RF).
• Sampling interval can be set within 0.25-600 seconds as needed
• Storage capacity limit when storing data
• Please ensure correct installation when using the heat insulation box
• Analysis Software supports Chinese and English languages, please select as needed