Overview
The SMART SENSOR AR300 + Infrared Thermometer is a Portable non-contact temperature measurement device with a temperature measurement range of -32~ 400 ° C, Accuracy of +/- 2%, resolution of 0.1 ° C, suitable for rapid measurement of object surface temperature. The product has laser positioning, data locking and backlighting functions, easy operation, Response Time is only 500ms, suitable for use in many environments.
Features
1. Wide temperature range: -32~ 400 ℃; 2. High Accuracy ： +/- 2%; 3. High resolution: 0.1 ℃; 4. Fast Response: 500ms; 5. Laser positioning function; 6. Data locking function; 7. Backlight display; 8. Automatic shutdown; 9. Portable design: weight 130g; 10. Long Battery life: 12 hours.
Principle
Infrared Thermometer detects the infrared radiation energy emitted by the surface of the object (Response wavelength 8~ 14μm), converts the radiant energy into an electrical signal using the built-in Sensor, and then calculates and displays the temperature value through the microprocessor. The object distance ratio is 12:1 to ensure accurate measurement within the appropriate distance, and the emissivity can be adjusted from 0.1 to 1.0 to adapt to different material surface characteristics.
Applications
Industrial manufacturing, building inspection, Food processing, Healthcare, Automotive maintenance, Power equipment monitoring, environment monitoring
Steps
1. Install 2 1.5V AAA batteries; 2. Turn on the power switch; 3. Select the temperature unit (° C or ° F); 4. Use the laser to locate the target; 5. Align the measurement point and press the measurement button; 6. Read the temperature data on the display screen; 7. Optional data locking function to save the Measured value; 8. Automatic shutdown or manual shutdown after use.
Notice
* Avoid use outside extreme temperatures (Operating temperature 0~ 40 ° C) or high Humidity (relative humidity 10~ 95% RH does not condense); * Keep the temperature in the range of -20~ 60 ° C during storage; * Ensure that the measurement surface is clean to avoid dust affecting the accuracy; * Pay attention to laser safety when using, do not direct your eyes; * Regularly check the battery power to avoid errors caused by low power; * Adjust the emissivity setting according to the measured material (0.1~ 1.0); * Keep stable during measurement, object distance ratio within 12:1 to ensure accuracy.
