Overview
The SMART SENSOR AR842A + Infrared Thermometer is a Portable non-contact temperature measuring device with a temperature measurement range of -50 to 600 ° C, suitable for rapid measurement of surface temperature of objects. It has a High Accuracy, Fast Response and Multifunctional design and is widely used in industrial, domestic and scientific fields.
Features
1. Wide temperature measurement range, covering -50 to 600 degrees Celsius.
2. High Accuracy measurement, Accuracy +/- 2%, resolution 0.1 ℃.
3. Fast Response Time 500ms, improve measurement efficiency.
4.12:1 object distance ratio, allowing remote measurement.
5. Built-in laser positioning function to ensure accurate aiming.
6. Data locking and backlight functions for easy reading and recording of data.
7. Automatic shutdown design saves battery power.
8. Lightweight and portable, weight only 130g, easy to carry.
Principle
The Infrared Thermometer works on the principle of infrared radiation by detecting the infrared energy emitted by the surface of the object (Response wavelength 8~ 14μm), and converts the energy into a temperature reading using the built-in Sensor. The emissivity is fixed at 0.95, ensuring accurate measurement of the target temperature under standard conditions.
Applications
Industrial testing, household use, scientific research experiments, maintenance, safety monitoring
Steps
Install two 1.5V AAA batteries.
2. Turn on the device power supply.
3. Use the laser positioning function to aim at the target object.
4. Press the measurement button to get the temperature reading.
5. Use the data lock function to record the measurement results.
6. After use, the device will automatically shut down to save power.
Notice
* Ensure that the working Ambient Temperature is in the range of 0~ 40 ℃, the relative humidity is 10~ 95% RH and does not condense.
Avoid storing at temperatures below -20 ° C or above 60 ° C.
* Maintain the object distance ratio of 12:1 during measurement to avoid affecting the accuracy by being too close or too far.
* Regularly check the battery level to avoid measurement errors caused by low power.
The laser positioning function is only for auxiliary aiming, avoiding direct exposure to the eyes.
* Use a soft cloth when cleaning equipment and avoid the use of corrosion cleaners.
