Overview
YIHENG BPHS-060B High and Low Temperature Damping heat testing chamber is a new generation of high and low temperature (alternating) sensible heat testing chamber. It integrates the company's many years of successful experience in box design. Based on the humanized design concept, starting from the actual needs of customers, it meets customer requirements in details and provides high-quality products.
Features
1. Humanized design: Fluorine-free design, wet and dry ball type or electric kiln type multi-functional multi-stage programmable temperature and Humidity controller, fuzzy PID controller, accurate fluctuation of temperature and humidity control; Imported temperature and Humidity controller has long life, High Accuracy CFL20 words × 6 lines LCD display, keyboard input, easy to operate; There is a 25mm or 50mm diameter test hole on the left side of the box, which is convenient for experimental operation and Measuring temperature; The built-in sink can be pulled out and added with water, which is convenient to use.
2. Quality assurance: brand Compressor and circulating fan, so that the temperature distribution is uniform; environmentally friendly refrigerant (R134a) high efficiency, low energy consumption, promote energy saving; unique air duct circulation system to ensure uniform working room temperature Humidity; imported 304 mirror stainless steel liner, four corners and a half arc over, shelf bracket can be freely loaded and unloaded, easy to clean the box; multi-stage programmable control, simplify the complex test process, automatic control and operation.
3. Safety functions: independent temperature limit alarm system, automatic interruption of operation and sound and light alarm prompt if the temperature exceeds the limit; high temperature, low temperature and over-temperature alarm; Compressor overheating, overcurrent, overload protection, fan overheating protection, water shortage protection, etc.
4. Convenient data processing (optional): can be connected to a printer or 485 Communication interface, with USB data transfer interface (SD disk), with a computer to display and print Humidity and Time Linear dispersion, for inspection process data storage and playback to provide assurance.
Principle
Adopt wet and dry bulb or electric kiln multi-functional multi-stage programmable temperature Humidity controller and fuzzy PID controller to achieve accurate temperature control and humidity control; through brand Compressor and circulating fan combined with environmentally friendly refrigerant, efficient cooling and uniform temperature distribution; unique air duct circulation system to ensure uniform working room temperature Humidity; multi-stage programmable control simplifies the test process and realizes automatic operation.
Steps
1. Connect the power supply and ensure that the voltage is AC220V 50Hz.
2. Set the Temperature and Humidity parameters through keyboard input, and use the color Touchscreen controller to operate.
3. If you need to add water, pull out the built-in sink to add water.
4. Use the test hole on the left side of the box for experimental operation and temperature measurement.
5. Start the device and automatically run the multi-stage programmable control program.
6. Monitor the operating status and deal with any alarms promptly.
7. Optional connection to printer or computer for data processing and storage.
Notice
- Power supply voltage meets AC220V 50Hz requirements.
- Pay attention to the independent temperature limit alarm system during operation to avoid over-temperature operation.
- Regularly check the Compressor, fan and other components to prevent overheating, overcurrent and overload.
- Pay attention to safety when adding water to the built-in sink to avoid overflow.
- Ensure sealing when using test holes to prevent temperature and Humidity fluctuations.
- When cleaning the box, the shelf bracket can be freely loaded and unloaded for easy cleaning.
- When selecting the data processing function, connect the interface correctly to avoid data loss.
