Overview
The YIHENG BPH-9162 precision thermostatic incubator is a professional thermostatic device with a mirror stainless steel liner and a unique air duct circulation system to ensure even temperature in the studio. Equipped with a large LCD screen and a fuzzy PID controller, the temperature control is precise and easy to operate, suitable for precision experimental environments such as cell foster.
Features
1. Humanized design: large-screen LCD screen displays multiple sets of data on one screen, menu-type Operating interface is simple and easy to understand; mirror stainless steel liner is easy to clean, and unique air duct circulation ensures uniform temperature; the right side of the box is equipped with 25mm test hole for easy wiring.
2. Quality assurance: The fuzzy PID controller has accurate temperature control and small fluctuations, with a timing function of up to 99 hours and 59 minutes; multi-stage programmable control realizes automatic operation.
3. Automatic control of circulating fan speed: automatically adjust the wind speed according to the thermostatic state to avoid sample volatilization.
4. Self-diagnosis function: the LCD screen displays information when the fault occurs, and the running fault point is clear at a glance.
5. Convenient data processing (optional): can be connected to a printer or 485 Communication interface, USB data transfer interface supports computer recording.
6. Safety function (optional): independent temperature limit alarm system sound and light prompt, high temperature, low temperature and over-temperature alarm.
7. Multi-segment programmable controller: multi-segment LCD programmable, parameter one-screen display; can set temperature, wind speed, time and heating rate, support layer control and automatic switch machine; preset 7 groups of 63-step programs.
8. Ultraviolet sterilization system (optional): regularly disinfect the box to effectively prevent contamination.
Principle
The incubator precisely adjusts the temperature with a fuzzy PID controller, combined with the air duct circulation system to ensure uniform temperature in the studio. The circulating fan speed is automatically controlled according to the thermostatic state, and the wind speed is reduced when thermostatic to adapt to the needs of cell growth. Multi-segment programmable function allows users to set complex experimental parameters for automated operation.
Applications
Cell fostering, biological experiments, scientific research and education, pharmaceutical research and development
Steps
1. Connect the power supply to AC220V 50Hz.
2. Set parameters such as temperature and time through the large-screen LCD menu.
3. Use multi-segment programmable functions to preset experimental procedures (such as temperature layers).
4. Start the device and monitor the running status.
5. After the experiment, turn off the power and clean the liner.
Notice
• Ambient Temperature should be maintained at + 5~ 35 ℃.
• To avoid sample volatilization due to excessive air volume, the equipment will automatically adjust the wind speed.
• Check the LCD screen fault information when a failure occurs.
• Optional functions such as UV sterilization and Interface need to be configured on demand.
• Remove the shelf support when cleaning to ensure the hygiene of the liner.
