Overview
YIHENG DHP-9031B microbial incubator is a laboratory equipment specially designed for microbial foster, using mirror stainless steel liner and natural convection circulation method, equipped with LCD controller and observation window, suitable for cell foster, bacterial foster and other experimental environments.
Features
1. Mirror stainless steel liner for easy cleaning of the studio.
2. Natural convection cycle mode, no noise, avoid sample volatilization.
3. The box door is equipped with an observation window for easy observation of the experimental process.
4. Fuzzy PID controller, with accurate temperature control and small fluctuations, with timing function, the maximum time setting value is 99 hours and 59 minutes.
5. Independent temperature limit alarm system (optional), which automatically interrupts when the temperature exceeds the limit to ensure the safety of the experiment.
6. Multi-segment LCD programmable controller (optional), one-screen display of a variety of parameters, Menu Operating interface, simplify the complex test process.
7. Multi-stage temperature, time and heating rate programmable, support layer control and automatic switch function.
8. 7 groups of 63-step programs can be preset, each group has 9 steps, and the setting time is 0 to 5999 minutes.
9. Safety functions include independent temperature limit alarm, sound and light alarm prompt, high/low temperature and over-temperature alarm.
10. Ultraviolet sterilization system (optional), regularly disinfect the box to kill floating bacteria and prevent contamination.
Principle
The microbial incubator precisely adjusts the temperature through the fuzzy PID controller, and adopts the natural convection cycle to keep the temperature in the box uniform and stable to avoid noise and sample volatilization. Optional multi-stage programmable controller can realize automatic temperature and time control, and ultraviolet sterilization system for internal disinfection.
Applications
Cell fostering, bacterial fostering, microbiological experiments, laboratory research
Steps
Connect the power supply and ensure that the voltage is AC 220V 50Hz.
2. Open the box door and place the sample on the shelf.
3. Set parameters such as temperature and time through the LCD controller, and choose the programming mode.
4. Start the device and observe that the temperature is stable within the set range.
5. Monitor the sample status through the observation window during the experiment.
6. At the end of the experiment, turn off the power and clean the liner.
Notice
• Ambient Temperature should be maintained at + 5~ 35 ℃.
• To avoid over-temperature use, pay attention to the prompts of the independent temperature limit alarm system (if optional).
• Regularly clean the mirror stainless steel liner to prevent contamination.
• When using the UV sterilization system (optional), make sure that there is no human operation in the box.
• Optional parts such as multi-stage programmable controller, independent temperature limiting controller, etc. need additional booking, and the delivery period may be extended.
