Overview
The YIHENG DHP-9121B Microbial Incubator is a device designed for microbial fostering, with LCD controller for precise temperature control. Temperature range is RT + 5~ 65 ℃, Temperature resolution is 0.1 ℃, Fluctuation +/- 0.5 ℃, suitable for laboratory environment.
Features
1. Mirror stainless steel liner for easy cleaning.
2. Natural convection cycle mode, no noise, avoid sample volatilization.
3. The box door is equipped with an observation window for easy observation of the experimental process.
4. Fuzzy PID controller, with accurate temperature control and small fluctuations, with timing function, the maximum time setting value is 99 hours and 59 minutes.
5. Independent temperature limit alarm system, exceeding the limit temperature automatically interrupts to ensure experimental safety (optional).
6. Multi-segment LCD programmable controller, one-screen display of various parameters, menu-type Operating interface, simplifying complex test process (optional).
7. Multi-stage temperature, time and heating rate parameters can be set and programmed at the same time, support temperature layer control, slow heating, automatic switch and other functions (optional).
8. 7 groups of 63 steps can be preset, 9 steps per group, and the setting time is 0 to 5999 minutes (optional).
9. Ultraviolet sterilization system can regularly disinfect the inside of the box, effectively kill floating bacteria and prevent cell foster pollution (optional).
Principle
The incubator precisely adjusts the temperature through a fuzzy PID controller, and uses a natural convection cycle to achieve uniform heating, avoiding noise and sample volatilization. Optional multi-stage programmable controller for automatic temperature control and operation.
Applications
Microbial foster, cell foster, laboratory research
Steps
1. Connect the power supply to AC 220V 50Hz.
2. Set the temperature parameters and use the LCD controller to adjust to the required range of RT + 5~ 65 ° C.
3. Optional multi-stage programmable controller, preset temperature, time and heating rate program.
4. Start the device and monitor Temperature Fluctuation +/- 0.5 ℃.
5. After the experiment, turn off the power.
Notice
• Ambient Temperature should be maintained at + 5~ 35 ℃.
• Regularly clean the mirror stainless steel liner to ensure hygiene.
• Be careful to avoid direct sunlight when using the observation window.
• When selecting an independent temperature limit alarm system, it is necessary to set the alarm parameters correctly to prevent overheating.
• When selecting a UV sterilization system, the operator should avoid direct exposure to UV offline.
• Input Power is 550W to ensure stable power supply.
• The shelf comes standard with 3 pieces to distribute the load reasonably.
