Overview
YIHENG DHP-9211B microbial incubator is a professional equipment with mirror stainless steel liner, equipped with LCD controller, Temperature range RT + 5~ 65 ℃, volume 210L, suitable for microbial foster and other experimental environments.
Features
1. Mirror stainless steel liner for easy cleaning of the studio.
2. Natural convection cycle mode, no noise, avoid sample volatilization.
3. The box door is equipped with an observation window for easy observation of the experimental process.
4. Fuzzy PID controller, with accurate temperature control and small fluctuations, with timing function, the maximum setting time is 99 hours and 59 minutes.
5. Independent temperature limit alarm system, exceeding the limit temperature automatically interrupts to ensure experimental safety (optional).
6. Multi-segment LCD programmable controller, one-screen display of various parameters, menu-type Operating interface, simplifying complex test process (optional).
7. Multi-stage temperature, time and heating rate programmable, support layer control and automatic switch function (optional).
8. 7 groups of 63-step programs can be preset, each group has 9 steps, and the setting time is 0 to 5999 minutes (optional).
9. Safety functions include independent temperature limit alarm, sound and light prompt, high/low temperature and over-temperature alarm.
10. Ultraviolet sterilization system, regularly disinfect the box to kill floating bacteria and prevent contamination (optional).
Principle
The incubator uses a natural convection cycle to precisely adjust the temperature through a fuzzy PID controller for stable temperature control. The optional multi-segment LCD programmable controller allows users to set parameters such as temperature, time and heating rate for automatic control and layer heating.
Applications
Microbial foster, cell foster
Steps
1. Connect the power supply to AC 220V 50Hz.
2. Set parameters such as temperature and time through the LCD controller.
3. If you need to program, preset multiple program steps.
4. Start the equipment and observe the experimental process.
5. Clean liner after use.
Notice
• Ambient Temperature should be maintained at + 5~ 35 ℃.
• Optional features such as independent temperature limit alarm, multi-stage programmable controller and UV sterilization system require additional booking.
• Regularly check the operating status of the equipment to avoid overheating.
• Use appropriate tools when cleaning to avoid damage to the mirror stainless steel liner.
