Overview
The BPZ-6123LC Vacuum oven produced by YIHENG Instruments has the characteristics of short heating time, accurate control, safety and reliability, and can smoothly dry heat-sensitive substances and easy oxidation substances. The product adopts digital pressure sensor and microcomputer automatic control Vacuum Level and vacuum pump.
Features
1. Cuboid studio, large effective volume utilization rate, accurate and reliable temperature control by microcomputer temperature controller
2. Tempered, bulletproof double-decked Glass doors to observe indoor objects, can be filled with inert gas
3. The box door is closed and elastic and adjustable, and the integrated silicone rubber door sealing ring ensures a high Vacuum Level in the box
4. The studio is made of stainless steel plate material, which is durable and easy to clean
5. Storage, heating, testing and drying can be carried out in an oxygen-free or inert gas environment to prevent oxidation
6. The drying time is more than 50% shorter than the traditional Vacuum oven
Principle
The Vacuum oven controls the Vacuum Level through digital technology, and automatically controls the Vacuum Level with a resistance silicon tube pressure sensor, with a control accuracy of +/- 1%. Through programmed vacuum cycle control, the highest and lowest Vacuum Level values are set. Humidity continues to decrease as the cycle progresses, and the drying speed is accelerated. The maximum number of cycles can reach 99 times.
Applications
Thermal drying, oxidation drying, material storage, heating test, inert gas environment operation
Steps
1. Direct programming in the Operating interface, preset 7 groups of 63 steps to program
2. Set each group time to 1-99 hours and 59 minutes
3. Preset boot and shutdown times
4. Control any two points or areas of Vacuum Level in the range of 10~ 105Pa through the panel
5. Set the temperature program, can use traditional program control mode or slope mode program control
Notice
• Vacuum Level Control Using Digital Technology, Manual Control Is a History
• The vacuum gauge adopts a resistance silicon tube pressure sensor to ensure that the stable pressure value is not affected by the airflow
• Temperature and thermostatic time can be set to control each process of heating, thermostatic or cooling
The maximum number of cycles can reach 99 times
• Vacuum Level up to 133Pa
