Overview
The BPZ-6213LCB Vacuum oven produced by YIHENG Instruments has the characteristics of short heating time, accurate control, safety and reliability, and can smoothly dry heat-sensitive substances and easy oxidation substances. The product uses a digital pressure sensor to automatically control the Vacuum Level and vacuum pump through a microcomputer.
Features
1. Cuboid studio, making the effective volume utilization rate large, microcomputer temperature controller, accurate and reliable temperature control.
2. Tempered, bulletproof double-decked Glass doors can be used to observe objects in the work room at a glance and can be filled with inert gas.
3. The box door is closed and elastic and adjustable, and the integrally formed silicone rubber door sealing ring ensures a high Vacuum Level in the box.
4. The studio is made of stainless steel plate material to ensure that the product is durable and easy to clean.
5. Storage, heating, testing and drying can be carried out in an environment without oxygen or filled with inert gas without causing oxidation.
6. Shorten the drying time, compared with the traditional Vacuum oven, the drying time is reduced by more than 50%.
Principle
The Vacuum oven uses digital technology to control the Vacuum Level, and automatically controls the Vacuum Level through the digital vacuum gauge to provide accurate and effective Vacuum Level control. The vacuum gauge uses a resistance silicon tube pressure sensor to ensure a stable pressure value and is not affected by airflow. The temperature control has 7 sets of 63-step programmable functions, which support traditional program control mode and slope mode program control, and realize precise control of each process of heating, thermostatic or cooling.
Steps
1. Set the highest and lowest Vacuum Level according to the requirements, and carry out programmed vacuum cycle control.
2. Direct programming in the Operating interface, preset 7 groups of 63 steps can be programmed, and the setting time of each group is 1-99 hours and 59 minutes.
3. Control any two points or areas between Vacuum Levels in the range of 10~ 105Pa through the panel.
4. Set the temperature, thermostatic time or use the slope mode program control to define the temperature change process.
Notice
• Vacuum drying process control provides programmed vacuum cycling, further reducing drying time.
• Cycle program control function can preset start and shutdown time to ensure reliable heating or drying process.
• Vacuum Level Control uses digital technology, manual control is a thing of the past, ensuring precise control.
• Temperature control supports a variety of program modes to achieve controllability of each process in the entire temperature experiment.
