Overview
RONGHUA INSTRUMENT DF-1 heat-collecting Magnetic Stirrer has a reasonable structure and excellent material selection, which solves the problems of long-term stirring and heating thermostatic of spherical flasks for vacuum reaction and pressure reaction. The product can be used for water, oil and dry burning, and is divided into Dial and digital. The heat-collecting heating method is used to make the heating solution in a uniform and strong heat radiation, and the heating speed is fast and energy is saved.
Features
1. Reasonable structure and excellent material selection;
2. Solve the long-term stirring and heating thermostatic problems of spherical flask vacuum reaction and pressure reaction;
3. It can be used for water, oil and dry burning;
4. Dialed into two types of Dial and Digital Explicit;
5. Adopt the collector heating method, the heating speed is fast, and energy is saved;
6. Well-equipped with magnets and PTFE stirrers, durable.
Principle
This machine adopts the collector heating method, and drives the stirrer swirl/spin by magnetic force, so that the heating solution is completely in a uniform and strong heat radiation, so as to achieve rapid heating and efficient stirring.
Steps
1. Place the Stirrer on a stable countertop.
2. Select the water, oil or dry burning mode as required.
3. Temperature range (room temperature~ 300 ℃) and speed range (0~ 2600 rpm);
4. Start the equipment for stirring and heating operations;
5. Turn off the power and clean the equipment after use.
Notice
Make sure the equipment is placed on a smooth countertop for use.
- Choose the heating mode correctly according to the experimental requirements;
- Pay attention to temperature control and speed regulation settings during operation to avoid exceeding the limit;
- Turn off the power immediately after use and keep it clean.
