Overview
DHG-9030 electric thermostatic blast drying oven is a laboratory equipment under the RONGHUA INSTRUMENT brand. Its Inner chamber dimensions are 300 × 300 × 350mm and the volume is 30L. The equipment adopts intelligent digital temperature control, Temperature range is room temperature + 10 ℃ to 300 ℃, suitable for drying, baking, heat treatment and other thermostatic environment operations.
Features
1. Intelligent digital temperature control system, intuitive operation.
2. Temperature range, from room temperature + 10 ℃ to 300 ℃.
3. Equipped with an observation window, it is convenient to observe the sample status in the box in real time.
4. Using electric heating tube heating, temperature stability.
Principle
The drying oven heats the air in the box through the built-in electric heating tube, and cooperates with the blast system to force the hot air to circulate inside the studio to ensure uniform temperature. The intelligent digital temperature control system monitors and adjusts the heating power in real time to stabilize the temperature in the box at the target value set by the user.
Applications
Laboratory drying, material baking, heat treatment, thermostatic preservation of samples
Steps
1. Turn on the power supply and turn on the power switch of the device.
2. Set the required operating temperature through the intelligent digital display panel.
3. Put the items to be processed into the studio and close the box door.
4. The equipment starts to heat up and run, and the internal situation can be monitored through the observation window.
5. After the work is completed, turn off the power supply and wait until the temperature in the box drops to a safe range before taking out the items.
Notice
When the equipment is working, the box and internal temperature are high, so do not touch it directly to prevent burns.
• Do not put flammable, explosive, volatile and corrosive items in the box.
• When placing the sample, do not block the air duct in the box to ensure uniform temperature.
The equipment should be placed in a ventilated, drying and stable place for use.
Before cleaning the equipment, be sure to cut off the power and wait for it to chill down completely.
• Non-professionals should not disassemble or repair the equipment without authorization.