Overview
The TQC Baker coating applicator VF1515 is a multi-sided cylindrical coating applicator with 4 paint surfaces, which can be painted with 4 preset thicknesses. The application width is 80mm, which is suitable for Spreaders of various products on flat or smooth solid substrates. It is made of stainless steel and can resist the erosion of acidic or alkaline substances in Coatings or cleaning agents.
Features
1. The cylindrical baker film applicator has 4 faces and can be used to coat 4 different film thicknesses;
2. Meet standards: ASTM D 3022, ASTM D 823;
3. The application width of the cylindrical film applicator is 80mm, which is suitable for most products and corresponding solid substrates;
4. The material is stainless steel, which is not affected by acids and other chemical elements.
Principle
With its cylindrical design, the Baker coating applicator uses 4 different surfaces to roll the Spreader on the substrate, each of which presets a specific wet film thickness for accurate filming. The application width is fixed at 80mm to ensure uniform Spreader film on flat or smooth solid substrates. The stainless steel material guarantees that the coating applicator is free from chemical corrosion when in contact with Coatings or cleaning agents.
Standards
ASTM D 3022、ASTM D 823
Steps
Select the appropriate finish of the Baker coating applicator VF1515 for the desired wet film thickness (100 µm, 150 µm, 200 µm or 250 µm).
2. Place the coating applicator on a flat or stationary solid substrate.
3. Roll the coating applicator evenly along the substrate to ensure that the application width is 80mm.
4. After Spreader is completed, clean the coating applicator in time to avoid Coating residue.
Notice
• Check whether the surface of the coating applicator is clean and free of residues before use;
• Ensure that the substrate is flat and stable to avoid uneven film;
• Spreader process to maintain uniform strength to prevent thickness deviation;
• Wash with appropriate cleaning agent immediately after use to avoid Coating curing;
• Avoid contact with strong acids or alkalis in the coating applicator to prolong the service life;
Store in a drying environment to prevent stainless steel rusting.
