Overview
LABO Compression Tester (Model: 17051 (2)) is a highly intelligent automated testing equipment, using Rambo's independently developed testing system. The instrument is easy to operate through the Touchscreen interface, and supports ten test methods to switch arbitrarily on the main screen, effectively improving the testing efficiency. The testing process does not require manual intervention, which can reduce human errors. The test data can be directly printed or uploaded to the Labo-DMS experimental data management system through WIFI and RS232.
Features
1. Adopt a high-intelligence detection system independently developed by Rambo to achieve a fully automated inspection process.
2. Equipped with 8-inch high definition integrated Touchscreen operation interface, test switching is convenient.
3. Support ten test methods to switch arbitrarily on the main screen to improve the testing speed.
4. The detection data can be directly printed or uploaded to the Labo-DMS system via WIFI or RS232.
5. The Labo-DMS system supports online detection and transmission of multiple instruments, sharing a set of software to save costs.
6. The system report module can be edited arbitrarily, generate Word format reports, and support analysis report functions.
7. High Accuracy American Vishay Sensor.
8. The instrument is verified by a series of indicators before leaving the factory to ensure reliability, stability, safety and measurement accuracy.
9. With test starting position memory and automatic reset function.
Provide two test range options (10-1000N and 50-5000N) to adapt to different measurement requirements.
Principle
The specimen is placed between the upper and lower pressure plates of the instrument, and continuously increasing pressure is applied through the pressure plate until the specimen is crushed. The instrument records and displays the maximum pressure value applied, which is the Compressive Strength of the specimen. This instrument is designed to meet the requirements of paper, Cardboard, Corrugated Board, buffer material and other related test standards.
Applications
Paper, Cardboard, Corrugated Board, Cushioning Material
Steps
1. Select the test range according to the estimated strength of the sample: the measurement value is less than 50N and the range of 10-1000N is recommended; if it is greater than 50N, the range of 50-5000N is selected.
2. Place the specimen on the lower platen of the instrument.
3. Select the desired test method through the main Touchscreen interface.
4. Start the test, and the instrument automatically applies pressure until the sample collapses.
5. After the test is completed, the instrument automatically resets and records the maximum pressure value (intensity).
6. Data can be directly printed or uploaded to the computer Labo-DMS system through WIFI and RS232 for processing.
Notice
Please ensure that the instrument power supply meets the requirements (110-240V, 50/60 Hz) before use.
* Choose the test range correctly according to the estimated strength of the sample to ensure measurement accuracy.
When placing the specimen, ensure that it is located in the center of the platen.
The size of the instrument platen is 125 x 125mm for the upper platen and 170 x 125mm for the lower platen. Please ensure that the sample size is suitable.
The test speed can be set within the range of 1-50mm/min, and the return speed is fixed at 60mm/min.
* The net weight of the instrument is 40kg, and safety should be paid attention to when handling and placing.
The data transmission interface is RS232 and WiFi, please ensure the correct connection.
* The instrument has been calibrated and verified before leaving the factory, and the user does not need to adjust the accuracy by himself.
* Optional accessories can be configured according to specific testing requirements.
