Overview
LABO LB-BT10 paper cup body stiffness tester is used for the measurement of various types of paper cups with paraffin wax, polyethylene (PE) film and other substances on the surface for holding cold and hot beverages and ice cream, and can also be used for paper bowls and plastic cup body stiffness measurement.
Features
1. Adopt single-chip microcomputer control technology
2. Dual probe transmission and dual probe measurement (dual probe Sensor) to ensure uniform force
3. Fully automatic test completion, automatic reset
4. LCD Chinese display
5. Test data memory and statistical processing functions (printer prints out single Measured value, average value, MAX Maximum and MIN Minimum)
Principle
The specimen on the cup body stiffness tester sample stand, adjust the height of the sample stand, the measurement head close to the side wall of the sample, the vertical distance between the side measuring head and the bottom of the cup is two-thirds of the cup height, and the cup body seam toward the tester, open the instrument, measuring the cup body stiffness.
Applications
Paper cups, paper bowls, plastic cups
Standards
GB/T27590-2011、QB/T2294
Steps
1. Place the specimen on the specimen stand of the cup body stiffness tester
2. Adjust the height of the sample stand so that the measurement head is close to the side wall of the sample
3. The vertical distance between the side measuring head and the bottom of the cup is two-thirds of the height of the cup
4. Make the seam of the cup body facing the tester
5. Turn on the instrument and measure the stiffness of the cup body
Notice
• Measure 5 paper cups for each sample, and represent the measurement result as its average value
• Accurate to 0.01N
