Overview
LABO LB-KY30B Compressive tester is a test equipment for testing the compressive strength of cartons, Miscellaneous Encasement containers, and transportation Encasement parts. The equipment has three functions of compressive test, fixed value test and stacking test. It can measure the ultimate compressive strength, detect the overall performance of the box and simulate the pressure durability under storage and transportation conditions. It also has data display, storage, statistical analysis and report printing functions.
Features
High Accuracy Force Sensor, factory accuracy < 0.5%, better than ISO standard +/- 1%.
2. Fully automatic test completion, with data display, memory storage, analysis, statistical processing and printing test report functions, easy to operate.
3. The test speed and return speed can be preset, and the position of the upper platen can be adjusted freely, making the test faster and more effective.
4. The Force Sensor is located above, which is convenient for users or third parties to use the standard Sensor for Indication Error calibrating.
5. Equipped with multiple safety protection measures: overload protection for pressure values of the measurement and control system, automatic locking of the transmission device for power failure, automatic reset of the pressure value of the Sensor to zero display, and automatic return to the initial position after the test is completed.
Principle
The device applies pressure to the sample (such as a carton) placed on the lower pressure plate by driving the upper pressure plate to move downward. In the compression test, the device continues to pressurize until the sample is destroyed, and automatically records the maximum pressure value and the amount of compression deformation. In the fixed value test, the pressure is stopped according to the set pressure or deformation amount to detect the performance of the box. In the stacking test, the set pressure is continuously applied to the sample within the specified time to test its pressure durability. The whole process is automatically controlled by the measurement and control system and the data is recorded.
Applications
Cartons, Encasement Containers, Transport Encasement Parts
Steps
1. Set the corresponding parameters on the measurement and control system according to the test requirements (pressure resistance, fixed value or stacking test).
2. Place the specimen (e.g. carton) in the center of the lower pressure plate of the equipment.
3. Start the device, and the upper platen will move downward at a preset speed and apply pressure to the sample.
4. After the test is completed, the equipment automatically stops and returns to its original position.
5. View and analyze test data through the measurement and control system, and print test reports.
Notice
• Power frequency of the equipment is AC380V +/- 22V 50Hz 10A and must be reliably grounded.
• Before operation, make sure that the flatness and parallelism of the upper and lower pressure plates meet the requirements.
• When calibrating, place the standard Sensor between the upper and lower platens.
• The equipment provides two configurations: Type A (computer software measurement and control) and Type B (LCD Chinese display measurement and control), which can be selected according to needs.
• In addition to the standard model number, Miscellaneous non-standard specifications can be customized.
