Overview
LB-TPKY50 tray Compressive tester is a LABO brand High Accuracy test equipment. It adopts American Shiquan High Accuracy Force Sensor (Precision < 0.5%), Japan Panasonic servo drive system and Taiwan TBI precision ball screw sub-drive to ensure running displacement accuracy, Reliability and Stability. The device supports free adjustment of preset Test speed, return speed and upper platen position, and automatically completes the test, which is convenient and efficient to operate. The Sensor is located above and connected to the upper platen, which is convenient for users or third parties to perform Indication Error calibrating through the standard Sensor.
Features
1. High Accuracy Force Sensor, Precision Control < 0.5%
2. Equipped with Panasonic's high-performance servo drive system to achieve closed-loop control of position, speed and torque, strong overload resistance and good high-speed performance
3. Using Taiwan TBI precision ball screw pair, the transmission efficiency is as high as 90%~ 98%, the positioning accuracy is high, Sensitivity is good
4. The main controller adopts 32-bit ARM processor, which has fast operation speed and high control accuracy
5. The data collection adopts the new American ultra-high accuracy 24-bit AD, Sampling rate 2000 times/second, Force Measurement accuracy is better than the national 0.5 standard
6. Support Chinese and English language interface switching, function navigation, custom test projects and reports, easy to operate
7. Provide rich interface expansion capabilities, including analog input and output, switching input and output, etc., with strong anti-interference ability
Principle
The testing machine controls the precision ball screw pair drive through the servo drive system to achieve accurate displacement of the upper pressure plate. The force sensor is located above to monitor the applied force value in real time. The data collection system uses 24-bit AD chip high-speed sampling, combined with ARM processor for closed-loop control, to ensure that the speed, displacement and force during the test process are accurately matched. Users can automatically complete the test with preset parameters and calibrate with standard Sensors.
Applications
Pallet compressire strength test, carton compression test
Standards
National 0.5 standard
Steps
1. Test speed and return speed
2. Adjust the position of the upper platen
3. Start the device to automatically complete the test
4. Use a standard Sensor to calibrate between the upper and lower platens
Notice
* Power supply voltage needs to be AC220V +/- 10% 50/60Hz, and reliable grounding
* Ensure Plate Smoothness Within +/- 0.25mm, Parallelism ≤ 1.5m
Check whether the components of the equipment are firmly connected before operation
* Standard Sensors should be used when calibrating to avoid external interference
Regular maintenance of drivetrain and Sensors to maintain accuracy
