Overview
LABO LB-ZD100 simulated transportation vibration test bench is mainly used to evaluate the strength of Encasement parts under sinusoidal vibration or resonance and the protection ability of Encasement to the contents, and test Encasement shock and anti-collision performance. The equipment can detect product structural defects in the laboratory in time, and ensure stable performance during transportation through improved design.
Features
1. Humanized operation and control, the equipment works stably and reliably
2. Meet the road transportation simulation test, suitable for different industry testing requirements
3. Large load capacity, strong anti-partial load ability, amplitude is not affected by load, and strong anti-interference ability
4. Synchronous vibration, uniform table vibration
5. Complies with ASTM D999 and ISTA shipping standards
6. Easy to operate, unique structural design, can be operated without auxiliary work, simple and safe
Principle
The equipment adopts motor excitation mode, and the running speed is controlled by DC speed regulation to generate swirl/spin vibration. The motion trajectory is elliptical, and the vibration environment during transportation is simulated to evaluate the performance of Encasement parts.
Standards
ASTM D999、ASTM-D4169-09、ISTA 1A、1B、2A、2B
Steps
1. Set the running speed to be adjustable within the range of 150-300RPM
2. Set the time range from 1 second to 999 hours
3. Start the equipment for vibration testing
4. Monitor the test process to ensure that the Safety protection device works properly
Notice
• Operating temperature in the range of 0~ 40 ℃
• Operating humidity at 0-90% RH to avoid condensation
• The load does not exceed the maximum test load of 100kg
• Pay attention to the over-Rotation speed protection function to prevent the motor from overloading
• Use AC220V +/- 10% 50Hz 1P power supply
