Overview
The HENGZHENG DSH-16A Halogen moisture meter is a new type of rapid moisture detection instrument that uses an annular halogen lamp to ensure uniform heating of the sample, easy operation and accurate measurement. The instrument heats the rapid drying sample through an annular tube halogen while measuring the weight of the sample, continuously displays the percentage of moisture loss, and locks the final Moisture content value after drying. It has good conformity with the national standard oven method. It can replace the oven method and has higher detection efficiency. Generally, the sample can be measured in only a few minutes.
Features
1. Simple operation and accurate testing.
2. Adopt LCD display screen, with clear display, which can display 9 parameters such as moisture value, sample initial value, final value, measurement time, temperature initial value, and final value;
3. It has the function of connecting with computers and printers.
4. Ring halogen lamp heating, sample uniform rapid drying, the surface is not easy to damage;
5. The test results are consistent with the national standard oven method, and the detection efficiency is high. Generally, the sample is measured in a few minutes.
Principle
The halogen moisture meter uses a ring tube halogen Heating mode to rapidly dry the sample while measuring the weight of the sample. During the drying process, continuous measurement and immediate display of the percentage of Moisture content lost in the sample. After the drying procedure is completed, the final measured Moisture content value is locked and displayed. Halogen heating can evenly and quickly dry the sample at high temperature to ensure accurate results.
Applications
Grain, feed, seeds, rapeseed, dehydrated vegetables, chemical, tea, food, meat, Spinning & weaving, agriculture and forestry, paper, rubber, plastic, Spinning & weaving and other industries in the laboratory and production process moisture determination; at the same time meet the determination of solid, granular, powder, colloid and liquid moisture content.
Steps
1. Prepare the sample and place it on the pan;
2. Set the heating temperature and time parameters.
3. Start the instrument to start heating and drying;
4. The instrument automatically measures and displays the moisture loss process;
5. Moisture content is locked and displayed after drying.
Notice
- Make sure the instrument is calibrated accurately before use;
The sample is placed evenly to avoid uneven heating.
Pay attention to the heating temperature setting to prevent damage to the sample.
- Regularly clean and maintain the instrument.
- Follow the Operation Manual to avoid misuse.
