Overview
SDPTOP DCY-0515 Low Temperature Circulating Bath is an upgrade product of DC series Low Temperature Circulating Bath, which adopts intelligent LCD display and microcomputer thermostatic Control system, with liquid level alarm and communication functions. The instrument consists of temperature control part, Sensor, circulating stirring part, heater, refrigeration part and stainless steel inner tank. Temperature range is -5~ 95 ℃, Temperature Fluctuation +/- 0.05 ℃, Tank volume is 15L.
Features
1. Upgraded Products of DC Series Low Temperature Circulating Bath
2. Adopt newly designed LCD display and microcomputer thermostatic Control system
3. Can add communication function, two-way communication with computer
4. Liquid level alarm function
5.15 liter model Mixing pump capacity 10 L/min, Power 1500W-3500W
6. Both the inner tank and the box are made of high-quality stainless steel
7. Temperature Fluctuation +/- 0.05 ℃, Display resolution 0.1 ℃
Principle
DCY Series Low Temperature Circulating Bath achieves precise temperature control through intelligent LCD Temperature Control system, Pt100 platinum resistance temperature sensor, circulating stirring section, heater and cooling section. The system processes Sensor data through microcomputer, adjusts heating and cooling output, and keeps the temperature in the tank stable at the set value.
Steps
1. Turn on the power switch
2. Turn on the refrigeration switch and cycle switch as needed
3. Use the increase key, decrease key, shift key and function key to set the temperature parameters
4. Monitoring PV display Measuring temperature, SV display Set temperature
5. Observe the beam to display the heating control output percentage
6. Pay attention to the status of the hydration indicator light, running indicator light, heating light and alarm light
Notice
• When the water level is low, the hydration indicator light is on
• It is always on during operation, and the running indicator light flashes during self-tuning work
• The heating light is on when the heating output is output
• Alarm ① is over-temperature alarm, alarm ③ is water level indication
• Pay attention to monitoring the liquid level alarm function
