Overview
The DCY-4006 Low Temperature Circulating Bath is a DC series upgrade product of the SDPTOP brand, featuring a microcomputer thermostatic Control system and LCD display, with High Accuracy Temperature Control and a variety of practical functions. The instrument consists of a temperature control part, Sensor, circulating stirring system, heating and cooling components and stainless steel inner tank, etc., suitable for experimental environments that require precise temperature control.
Features
1. Upgrade of DC Series Low Temperature Circulating Bath with newly designed LCD display and microcomputer thermostatic Control system
2. Can add communication function to support two-way communication with computers
3. Equipped with liquid level alarm function to ensure safe operation
4.6 liter model stirring pump capacity 8 L/min, Power 900W-2000W; 15 liter model stirring pump capacity 10 L/min, Power 1500W-3500W
5. The inner tank and the box are made of high-quality stainless steel, maintaining all the advantages of the DC series
6. Temperature Fluctuation +/- 0.05 ℃, Display resolution 0.1 ℃
Principle
DCY-4006 Low Temperature Circulating Bath uses intelligent liquid crystal display temperature control part, Pt100 platinum resistance temperature sensor, circulating stirring part, heater, refrigeration part and other components to work together. The system monitors the temperature of the inner tank, uses a microcomputer to control the heating and cooling output, and combines a circulating pump to ensure the uniform and stable temperature in the tank to achieve accurate thermostatic control.
Steps
1. Turn on the power switch and start the device
2. Use the function keys, increase keys, decrease keys, and shift keys to set the target temperature and related parameters
3. Turn on the refrigeration switch and cycle switch as needed
4. Monitoring PV display Measuring temperature, SV display Set temperature or parameters
5. Observe the status of operating indicators, heating lamps and alarm lamps to ensure the normal operation of the equipment
6. Turn off the power switch after use and clean the equipment
Notice
• Pay attention to the liquid level alarm function, and deal with the water level problem in time when the water replenishment indicator light is on
• The running indicator light is always on to indicate that the device is running, and when it flashes, it indicates the self-tuning working state.
• When the alarm light is on, check for abnormal overtemperature or water level
• Make sure the inlet and outlet pipes are connected correctly to avoid leakage
• Regularly check the drain valve and heat dissipation plate to keep the equipment clean
• Follow safety regulations during operation to prevent burns or electric shocks
