Overview
The SDPTOP FB423 Auto Internal Cal Electronic Analytical Balance is a High Accuracy weighing instrument with a 420g weighing range and 1mg Readability. It is designed with ABS engineering plastic and an all-aluminum base to ensure a lightweight and robust construction. The product has a built-in weight Automatic calibration function and is equipped with a transparent Glass Draft Shield and an airflow Draft Shield to provide stable and accurate weighing performance.
Features
1. Automatic calibration of built-in weight to ensure accuracy of weighing results
2. Easy to operate, equipped with a clear LCD display
3. Using corrosion-resistant, anti-Impact ABS engineering plastics, light and strong structure
4. Built-in hook overload protection pan, equipped with airflow Draft Shield
5. The display screen shield provides dust and scratch protection to extend the service life
6. Glass door transport protection lock, 4-sided transparent Glass Draft Shield, one side aluminum alloy back plate
7. Full scale range peeling, four-level shockproof, adjustable weighing speed
8. All Aluminum Balance Base, Prevents Low Frequency Vibration, Stable Body
9. Piece counting, percentage weighing function
10. Automatic zero tracking adjustable, super overload protection
11. Automatic fault diagnosis, multiple unit conversion
Principle
The Electronic Analytical Balance detects the mass of the weighed item through the built-in Sensor, and uses the built-in weight for Automatic calibration to ensure accuracy. Four-level shock protection technology and dynamic temperature compensation function are used to effectively eliminate external interference and ensure weighing Stability. Data transmission is realized through RS-232 Interface, and automatic zero tracking and fault diagnosis system ensure long-term reliable operation.
Applications
Laboratory weighing, industrial testing, quality control, drug weighing, jewelry weighing, education and research
Standards
Compliance with standards is not mentioned in the product literature
Steps
1. Place the Balance on a smooth table and turn on the power supply
2. Wait for the Balance self-test to complete and the display screen is stable.
3. Select the weighing mode (piece or percentage) as required.
4. Place items to be weighed on the pan
5. Read the weighing results on the display
6. Use the peeling function for continuous weighing
7. Connect external devices to transmit data through the RS-232 interface
Notice
• Make sure the Balance is placed on a smooth, vibration-free countertop before use
• Avoid exceeding 420g Capacity
Automatic calibration of built-in weight
• Keep Draft Shield clean to avoid dust affecting weighing accuracy
• Glass door protection lock is enabled during transportation
• Avoid Strong Impacts and Vibration
• Clean the pan and protective cover in time after use
• If there is a fault alarm, please refer to the automatic fault diagnosis prompt
