Overview
The SDPTOP FA1604 Electronic Analytical Balance is a High Accuracy weighing device with ABS engineering plastic and all-aluminum base, which is lightweight and sturdy in construction and has good corrosion and impact resistance. Equipped with a clear LCD display, Draft Shield and protective cover, the Balance provides dust and scratch protection for accurate weighing in environments such as laboratories.
Features
1. Easy to operate and clear LCD display
2. Using corrosion-resistant and Impact-resistant ABS engineering plastics, the structure is light and strong
3. Built-in hook, overload protection pan, with airflow Draft Shield and display screen shield
4. Provide additional dust and scratch protection to extend service life
5. Glass door transport protection lock, 4-sided fully transparent Glass Draft Shield, one side aluminum alloy back plate
6. Full scale range peeling, four-level shock resistance, adjustable weighing speed
7. All Aluminum Balance Base, Prevents Low Frequency Vibration, Stable Body
8. Piece counting, percentage weighing function
9. Automatic zero tracking adjustable, super overload protection
10. Automatic fault diagnosis
11. Multiple unit conversions
Principle
The FA1604 Electronic Analytical Balance detects the mass of the weighed object with a High Accuracy Sensor and converts the signal into a digital display. It uses an external Calibration method, uses test weights to ensure weighing accuracy, and has automatic zero tracking and shock resistance to stabilize the measurement results in the working environment.
Applications
Laboratories, scientific research institutions, industrial quality control, educational institutions
Steps
1. Place the Balance on a stable plane and connect the power supply
2. Turn on the power switch and wait for the Balance self-test to complete.
3. Use external test weight to calibrate (if required)
4. Place the object to be weighed on the pan
5. Read the weighing results on the LCD screen
6. Perform peeling, piece counting, or unit conversion operations as required
7. Turn off the power after use and clean the pan
Notice
• Ensure that the working Ambient Temperature is within the range of 5 ° C to 40 ° C, and the relative humidity does not exceed 85%
• Avoid overloading to prevent damage to the Sensor
• Periodically use the test weight for external calibration to ensure accuracy
• Keep pan and Draft Shield clean to prevent dust from affecting weighing
• Glass door protection lock is enabled during transportation to prevent damage to parts
• Power supply voltage (220V/50Hz or 110V/60Hz) to avoid power mismatch
• Avoid operating in a strong vibration or air disturbance environment
